manual

ManualsBrandsYamaha ManualsBlu-ray PlayerBD-S667

Software Update for BD-S667

Page.1 of 4

September, 2010

Subject: BD-S667 Software Update Version 1.07

Yamaha is pleased to offer the following software update to ensure the best

possible performance and latest features for your Yamaha BD-S667 Blu-ray

Disc Player. This software improves stability of HDMI 1080p/24Hz playback.

CHECK THE UNIT’S SOFTWARE VERSION PRIOR TO THIS UPDATE

If the version number is the same or higher than Ver. 1.07, you DO NOT need

to perform this update.

How to check your software version:

Using the remote control, enter SETUP menu.

Move to “System Information” by pressing the [LEFT] button.

Current software version appears on TV as shown below.

Choose your update method:

There are 2 methods you can choose from.

z Update Disc Method…………Page 2

(Burning update file onto CD-R or CD-RW disc is required.)

z USB Thumb Drive Method……………Page 3

NOTE:

Performing this update will reset all setting except those in “Security”.

(Settings in “Security” are password, parental control and country code.)

< IMPORTANT NOTICE >

Do not attempt to update your Yamaha Blu-ray Disc Player using any other data file except

those provided directly from the Yamaha website.

Follow the instructions carefully and do not attempt any other procedures not specified in the

instructions provided by Yamaha.

Improperly updated products may cause improper operation, and any parts or service required

to restore proper operation will not be covered under the Yamaha Limited Warranty.

Summary of content (4 pages)

PAGE 1
Software Update for BD-S667 September, 2010 Subject: BD-S667 Software Update Version 1.07 Yamaha is pleased to offer the following software update to ensure the best possible performance and latest features for your Yamaha BD-S667 Blu-ray Disc Player. This software improves stability of HDMI 1080p/24Hz playback. CHECK THE UNIT’S SOFTWARE VERSION PRIOR TO THIS UPDATE If the version number is the same or higher than Ver. 1.07, you DO NOT need to perform this update.
PAGE 2
Software Update for BD-S667 Update Disc Method STEP 1 Preparation of update disc. Unzip the downloaded file “BDS667_Vxxx.zip”. “UPG” folder will appear. Burn this “UPG” folder onto a CD-R or CD-RW as data disc with ISO9660 format. Make sure the disc is finalized. This will be your update disc. STEP 2 Load update disc. Blu-ray player searches for update file. Wait till upgrade file is found. In case above message doesn’t appear automatically, enter “SETUP” menu and select “System” > “Upgrade” > “Disc”.
PAGE 3
Software Update for BD-S667 USB Thumb Drive Method STEP 1 Copy the update file to an USB thumb drive. Unzip the downloaded file “BDS667_Vxxx.zip”. “UPG” folder will appear. Copy this folder to the root directory of an USB thumb drive that supports USB Mass Storage Class. (It is recommended to delete all other files or folders.) STEP 2 Insert the USB drive USB port is located at the lower left corner, below the [power] button. USB Port STEP 3 Power on and enter “Upgrade”.
PAGE 4
Software Update for BD-S667 Troubleshooting < Update Disc Method > Case 1: After loading the update disc, the Blu-ray Disc Player doesn’t start the update. 9 Check if the update disc is finalized. 9 Check that the “UPG” folder is located at the root directory of the disc and is the only folder recorded in the disc. 9 Make sure the folder and file name of the update data is not renamed. 9 Burn the downloaded update file again using another disc. (CD-R is recommended.) Or, try the USB thumb drive method.