User's Manual

4 - 89
ENG
ENGINE REMOVAL
EC4M5000
ASSEMBLY AND INSTALLATION
Engine installation
1. Install:
Engine 1
Install the engine from right side.
Pivot shaft 2
Engine mounting bolt (lower) 3
Lower engine bracket 4
Bolt (engine bracket) 5
Engine mounting bolt (front) 6
Upper engine bracket 7
Engine mounting bolt (upper) 8
Bolt (left engine guard) 9
Lower engine guard 0
Bolt (lower engine guard) A
N
OTE:
Apply the molybdenum disulfide grease on the
pivot shaft.
T
R
.
.
85 Nm (8.5 m · kg, 61 ft · lb)
T
R
.
.
69 Nm (6.9 m · kg, 50 ft · lb)
T
R
.
.
34 Nm (3.4 m · kg, 24 ft · lb)
T
R
.
.
69 Nm (6.9 m · kg, 50 ft · lb)
T
R
.
.
55 Nm (5.5 m · kg, 40 ft · lb)
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
EC4M5211
Brake pedal
1. Install:
Spring 1
Brake pedal 2
O-ring 3
Bolt (brake pedal) 4
Clip 5
N
OTE:
Apply the lithium soap base grease on the
bolt, O-rings and brake pedal bracket.
Install the clip with its stopper portion a fac-
ing inward.
T
R
.
.
26 Nm (2.6 m · kg, 19 ft · lb)
New