User's Manual
3 - 36
INSP
ADJ
FRONT FORK INSPECTION/
FRONT FORK OIL SEAL AND DUST SEAL CLEANING
● Tighten the axle nut while pushing down
the drive chain.
T
R
.
.
Axle nut:
125 Nm (12.5 m • kg, 90 ft • lb)
● Tighten the locknuts.
T
R
.
.
Locknut:
16 Nm (1.6 m • kg, 11 ft • lb)
EC36C000
FRONT FORK INSPECTION
1. Inspect:
● Front fork smooth action
Operate the front brake and stroke the
front fork.
Unsmooth action/oil leakage → Repair
or replace.
EC36D001
FRONT FORK OIL SEAL AND DUST SEAL
CLEANING
1. Remove:
● Protector
● Dust seal 1
NOTE:
Use a thin screw driver, and be careful not to
damage the inner fork tube and dust seal.
2. Clean:
● Dust seal a
● Oil seal b
NOTE:
● Clean the dust seal and oil seal after every
run.
● Apply the lithium soap base grease on the
inner tube.