User's Manual
5 - 50
CHAS
4. Install:
● Plain washer 1
● Ring nut 2
Tighten the ring nut using the ring nut
wrench 3.
Refer to “STEERING HEAD INSPEC-
TION AND ADJUSTMENT” section in
the CHAPTER 3.
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
5. Check the steering shaft by turning it lock
to lock. If there is any binding, remove
the steering shaft assembly and inspect
the steering bearings.
6. Install:
● Plain washer 1
7. Install:
● Front fork 1
● Handle crown 2
● Main switch 3
● Coupler bracket 4
● Hose guide bracket 5
NOTE:
● Install the coupler bracket on the outside of
the hose guide bracket.
● Temporarily tighten the pinch bolts (under
bracket).
● Do not tighten the pinch bolts (handle crown)
yet.
8. Install:
● Plain washer 1
● Steering shaft nut 2
T
R
.
.
145 Nm (14.5 m · kg, 105 ft · lb)
STEERING