Owner's Manual

8-17

NOTE:

If the recommended oil is not available, SAE80W-

90 API GL-5 Hypoid gear oil may be used instead.

se from the final

gear case may occur when applying the rear

brake.

CAUTION:

ECB00420

Be sure no foreign material enters the final

gear case.

7. Install the oil filler bolt, and then tighten it to the

specified torque.

8. Check the final gear case for oil leakage. If oil

is leaking, check for the cause.

9. Install the final gear case guard by installing

the bolts and tightening them to the specified

torque.

EBU23421

Differential gear oil

The differential gear case must be checked for oil

leakage before each ride. If any leakage is found,

have a Yamaha dealer check and repair the ATV.

1. Final gear oil filler bolt

2. Correct oil level

3. Final gear oil

Recommended final gear oil:

See page 10-1.

Tightening torque:

Final gear oil filler bolt:

23 Nm (2.3 m·kgf, 17 ft·lbf)

Tightening torque:

Final gear case guard bolt:

7 Nm (0.7 m·kgf, 5.1 ft·lbf)

U4S110E0.book Page 17 Friday, August 4, 2006 4:03 PM