Owner's Manual

8-22
8
5. Clean the sponge material with water or sol-
vent.
WARNING
EWB01960
6. Squeeze the excess water or solvent out of
the sponge material and let it dry.
CAUTION:
ECB00470
● Do not twist the sponge material when
squeezing it.
● Do not apply oil to the sponge material.
7. Check the sponge material and replace it if
damaged.
8. Tap the air filter element lightly to remove
most of the dust and dirt. Blow out the remain-
ing dirt with compressed air as shown. If the
air filter element is damaged, replace it.
1. Air filter element
2. Sponge material
POTENTIAL HAZARD
Using low-flash-point solvents or gasoline to
clean the sponge material.
gasoline can
c
atch fire or explode.
HOW TO AVOID THE HAZARD
Use parts cleaning solvent or water to clean
the sponge material.
U4S110E0.book Page 22 Friday, August 4, 2006 4:03 PM