Owner's Manual

8-27

EBU24080

Adjusting the reverse lock release ca-

ble

The reverse lock release cable stretches with use,

which can result in improper function. Therefore,

the reverse lock release cable should be checked

and adjusted at the intervals specified in the peri-

odic maintenance and lubrication chart.

EBU28412

Checking the front brake pads and rear

brake friction plates

The front brake pads and the rear brake friction

plates must be checked for wear at the intervals

specified in the periodic maintenance and lubrica-

tion chart.

NOTE:

This ATV is equipped with a wet multiple disc type

rear brake which is located inside of the final gear

case.

EBU24171

Front brake pads

Check each front brake pad for damage and mea-

sure the lining thickness. If a brake pad is dam-

aged or if the lining thickness is less than 1.0 mm

(0.04 in), have a Yamaha dealer replace the brake

pads as a set.

NOTE:

The wheels need to be removed to check the

brake pads. (See page 8-48.)

1. Lining thickness

U4S110E0.book Page 27 Friday, August 4, 2006 4:03 PM