Owner's Manual

8-32

3. Push the brake camshaft lever in direction (a)

until it stops [apply approximately 47 N (10.6

lbf) (4.8 kgf) of force], and then turn the brake

pedal free play adjusting nut on the brake ca-

ble at the final gear case so that gap “A” mea-

sures 2.5–3.0 mm (0.10–0.12 in).

4. Push the brake camshaft lever in direction (a)

until it stops [apply approximately 47 N (10.6

lbf) (4.8 kgf) of force], and then turn the brake

lever free play adjusting nut on the brake ca-

ble at the final gear case so that gap “B” mea-

sures 4.0–6.0 mm (0.16–0.24 in).

1. Brake lever free play adjusting nut 1. Brake pedal free play adjusting nut

2. Brake camshaft lever

3. Gap “A”

U4S110E0.book Page 32 Wednesday, October 11, 2006 11:38 AM