Owner's Manual

8-48
8
4. Remove the defective bulb by pushing it in
and turning it counterclockwise.
5. Insert a new bulb into the bulb holder, push it
in, and then turn it clockwise until it stops.
6. Install the bulb holder (together with the bulb)
by turning it clockwise.
7. Install the tail/brake light assembly by install-
ing the washers and the nuts.
8. Close the storage compartment.
EBU25650
Removing a wheel
1. Loosen the wheel nuts.
1. Tail/brake light bulb holder
2. Tail/brake light assembly
1. Tail/brake light bulb holder
2. Tail/brake light bulb
U4S110E0.book Page 48 Friday, August 4, 2006 4:03 PM