Owner's Manual

4-23
4
WARNING
EWB00350
EBU19180
Auxiliary DC jack
The auxiliary DC jack is located at the front right
side of the ATV. The auxiliary DC jack can be used
for suitable work lights, radios, etc. The auxiliary
DC jack should only be used when the engine is
running.
2. Start the engine. (See page 6-1.)
3. Open the auxiliary DC jack cap, and then in-
sert the accessory power plug into the jack.
4. When the auxiliary DC jack is not being used,
cover it with the cap.
CAUTION:
ECB00120
● Do not use accessories requiring more than
the above maximum capacity. This may
overload the circuit and cause the fuse to
blow.
POTENTIAL HAZARD
Improper shock absorber assembly adjust-
ment.
WHAT CAN HAPPEN
Uneven adjustment can cause poor handling
and loss of stability, which could lead to an
accident.
HOW TO AVOID THE HAZARD
Always adjust the shock absorber assem-
blies on the left and right side to the same
setting.
1. Auxiliary DC jack
2. Auxiliary DC jack cap
Maximum rated capacity for the auxiliary DC
jack:
DC 12 V, 120 W (10 A)
U4S110E0.book Page 23 Friday, August 4, 2006 4:03 PM