User`s manual

2
Installation and wiring
2-2
 2. Installation conditions
This section explains the installation conditions necessary to operate the TS-SD in safe and correct manner.
Installation location
■
Install the TS-SD inside the control panel.
Installation direction
■
Install the TS-SD on a vertical wall.
Surrounding space
■
Install the TS-SD in a well ventilated location, with space on all sides of the TS-SD. (See the figure below.)
Surrounding space
20mm
or more
20mm
or more
10mm
or more
10mm
or more
23202-M4-00
Ambientoperatingtemperatureandhumidity
■
The TS-SD’s ambient operating temperature and humidity must be maintained within the following ranges.
•Ambienttemperature:0to40˚C
•Ambienthumidity :35to85%RH(nocondensation)
Environmentstobeavoided
■
To ensure safe and correct TS-SD operation, avoid using the driver in the following environments.
•Environmentswhichcontaincorrosivegasessuchassulfuricacidorhydrochloricacid,orwhereflammablegasesand
liquids are present in the atmosphere.
•Environmentswithexcessivedust.
•Environmentswhichcontainmetalcuttingchips,oil,andwater,etc.,fromothermachinery.
•Environmentssubjecttoexcessivevibration.
•Environmentswhereelectromagneticnoiseorelectrostaticnoiseisgenerated.
•Environmentsexposedtodirectsunlight.
c
CAUTION
  
performance deterioration or malfunctions.
  
TS-SD and other device. Otherwise, malfunctions may result.
 
cause product deterioration and malfunctions.