Owner's Manual
Table Of Contents
- INTRODUCTION
- IMPORTANT MANUAL INFORMATION
- TABLE OF CONTENTS
- LOCATION OF THE WARNING AND SPECIFICATION LABELS
- SAFETY INFORMATION
- DESCRIPTION AND MACHINE IDENTIFICATION
- CONTROL FUNCTIONS
- PRE-OPERATION CHECKS
- OPERATION
- RIDING YOUR ATV
- PERIODIC MAINTENANCE AND ADJUSTMENT
- CLEANING AND STORAGE
- SPECIFICATIONS
- NOISE REGULATION
- MAINTENANCE RECORD
- YAMAHA EXTENDED SERVICE (Y.E.S.)
![](/manual/yamaha/blaster-yfs200n/owner-s-manual-english/images/img-118.png)
8-32
EBU00411
Headlight beam adjustment
cC
It is advisable to have a Yamaha dealer make
this adjustment.
Vertical adjustment:
Loosen the headlight assembly mounting bolts
and adjust the vertical beam by moving the
headlight up or down.
1. Mounting bolt (×2)
EBU00412
Troubleshooting
Although Yamaha machines receive a rigid
inspection before shipment from the factory,
trouble may occur during operation. Any prob-
lem in the fuel, compression, or ignition systems
can cause poor starting and loss of power. The
troubleshooting chart describes a quick, easy
procedure for making checks. If your machine
requires any repair, take it to a Yamaha dealer.
The skilled technicians at a Yamaha dealership
have the tools, experience, and know-how to
properly service your machine. Use only gen-
uine Yamaha parts on your machine. Imitation
parts may look like Yamaha parts, but they are
often inferior. Consequently, they have a shorter
service life and can lead to expensive repair
bills.
q
q