Owner's Manual
Table Of Contents
- INTRODUCTION
- IMPORTANT MANUAL INFORMATION
- TABLE OF CONTENTS
- LOCATION OF THE WARNING AND SPECIFICATION LABELS
- SAFETY INFORMATION
- DESCRIPTION AND MACHINE IDENTIFICATION
- CONTROL FUNCTIONS
- PRE-OPERATION CHECKS
- OPERATION
- RIDING YOUR ATV
- PERIODIC MAINTENANCE AND ADJUSTMENT
- CLEANING AND STORAGE
- SPECIFICATIONS
- NOISE REGULATION
- MAINTENANCE RECORD
- YAMAHA EXTENDED SERVICE (Y.E.S.)
EBU00757
Oil level warning light checking method
4-2
Start the engine.
Wait a few seconds.
Engine oil level and
electrical circuit are OK.
Supply engine oil.
Oil level warning light
does not come on
(see NOTE).
Ask a Yamaha dealer to
inspect the electrical circuit.
NOTE:
If the main switch is turned off after the oil level
warning light goes off and the engine is immedi-
ately started again, the oil level warning light
may not come on. This does not indicate a cir-
cuit failure.
Turn the main switch to
“ON” and the engine
stop switch to “RUN”.
Oil level warning
light comes on.
The oil level warning
light stays on.
The oil level warning light
goes off.