Owner's Manual
Table Of Contents
- INTRODUCTION
- IMPORTANT MANUAL INFORMATION
- TABLE OF CONTENTS
- LOCATION OF THE WARNING AND SPECIFICATION LABELS
- SAFETY INFORMATION
- DESCRIPTION AND MACHINE IDENTIFICATION
- CONTROL FUNCTIONS
- PRE-OPERATION CHECKS
- OPERATION
- RIDING YOUR ATV
- PERIODIC MAINTENANCE AND ADJUSTMENT
- CLEANING AND STORAGE
- SPECIFICATIONS
- NOISE REGULATION
- MAINTENANCE RECORD
- YAMAHA EXTENDED SERVICE (Y.E.S.)
EBU00636
Rear shock absorber adjustment
The spring preload can be adjusted to suit the
rider’s weight and riding conditions.
Adjust the spring preload as follows:
1. Loosen the locknut.
2. To increase the spring preload, turn the
adjuster in direction a.
To decrease the spring preload, turn the
adjuster in direction b.
cC
Never attempt to turn the adjuster beyond
the maximum or minimum setting.
3. The length of the spring changes 1 mm
(0.04 in) per turn of the adjuster.
4-15
a
Standard length: 230 mm (9.1 in)
Minimum length (Hard): 222 mm (8.7 in)
Maximum length (Soft): 234 mm (9.2 in)
q
w
b
a
1. Adjuster 2. Locknut
a. Increase spring preload b. Decrease spring preload
a. Spring length