Read these operating instructions instructions carefully listed below'. Keep before these operating 1 Read these 2 Keep 3 4 Heed all warnings. Follow all instructions. 5 Do not use this apparatus 6 Clean 7 Do not block any ventilation openings. with the manufacturer's instructions. 8 handy instructions.
FCC INFORMATION 1 IMPORTANT UNIT! NOTICE: (for US customers) DO NOT MODIFY THIS Compliance This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used.
1 2 To assure the finest performance, please read this manual carefully. Keep it in a sate place for future reference. Install this sound system in a well ventilated, cool. dry, 17 clean place - away fiom vibration, dust. moisture, 18 Condensation will form when the surrounding temperature changes suddenly. Disconnect the power cable fiom the outlet, then leave this unit alone. direct sunlight, heat sources, and/or cold.
WHAT YOU SUPPLIED CAN DO PARTS ABOUT DISCS Types WITH THIS UNIT ......... ................................................ AND of discs/files FILES ................................. that can be used SETUP Operation 3 General Display Front panel ................................................................. Remote control ........................................................... .................................................................. 4 5 Upgrading General ..........
Blu,ray 3D Disc (Blu,ray Play back commercially-released Download additional secondary audio/video DiscTM)/DVD/CD Blu-ray contents available 3D Discs via BD-Live Playback_! (BD discs), in addition supported TM on BONUSVIEWrM-supported p. 25 to DVDs BD discs, and CDs. and enjoy BD discs. Direct USB cable connection to an iPod or iPhone enables high quality digital sound without any degradation caused by digital-to-analog conversion.
Region management Destination Europe • 12 cm (5 in) and 8 cm (3 in) discs can be played information BD-Video DVD-Video Region code "B" or "ALL" Region number or "ALL" back in D% this unit. Do not use an 8 cm (3 in) to 12 cm (5 in) adapter. • Use discs that conform indicated label. Playback standards quality to compatible by the presence of official quality discs can be played as logos on the disc of discs not complying is not guaranteed.
• Insert the disc with the label facing up. • In case of the disc recorded on both sides, face down the side you want to play back. • Playback may begin automatically, depending on the disc and setting of this unit. • The menu may be displayed first, depending on the disc. • The disc load time may vary depending on the disc. • Do not touch the surface of the (and the center hole). Hold by or its pointed edge • disc. Do not use aa disc pencil marker to write on the disc.
(b (On/Standby): Turns this unit on/Sets to standby mode. ® _%,._ This unit has an automatic standby function. • When the source is set to Disc/USB/Network, this unit automatically switches to standby mode if it is left turned on for 1 hour without playback or ally other operation being performed.
@ will appear pressed button on the top left corner of the screen when the Infrared signal transmitter @ MARKER _ point is not available. of a movie DIGEST (p. 10) _: Sets Bookmark (p. 27). After to select Bookmark at a specified is set, press the set point you want to jump to. You call set up to 12 Bookmarks. @ @ _== : Opens/Closes PROGRAM the disc tray. _ E_ : Sets the order (p. 27). You can set up to 15 tracks chapters of a DVD-Video @ Numeric buttons: disc.
"],J;iliAvV,_Tird_t.'_,JAVltl_lhV[tifl[o]Av_, ZOOM | _ size of the screen ® (zoom in/out: Color buttons screen instructions. SLEEP: @ INt_I: volume control 1_'1_ buttons according to on- buttons : Controls _ the subwoofer volume (p. 12). Press MUTE the volume. SEARCH function, _ _ _ point during refer to "Using this item from Status AUDIO _: _[_ format. FM control again _ search" menu the volume Press level. to resume _: playback.
TOP MENU _ _ : Displays (p. 52) if the disc contains using A/V/_I/I_ PROGRAM _ARKER NGE$T the top menu screen Select the desired item and ENTER. ZOOM _IIZIIIII I_?i_? 17_71 I?!!i_i? Specific operations may be different depending Follow the instructions of each menu screen. Cursor item. buttons ENTER: (,[v[._l_): Confirms RETURN: menu Returns contents details POP-UP/MERU Moves the focused _[_ K]_: displayed on the disc. to select the focused menu/item.
.So ® I l! @ AC IN jack (p. 16): Connect the supplied power cable. @ SPEAKERS terminals (p. 11): Connect speakers. @ ANTENNA jack (p. 12): Connect an FM antenna. @ REMOTE CONTROL (IN/OUT) jacks (U.S.A. and Canada models only): Connect other components for remote control. @ DIGITAL IN (COAXIAL/OPTICAL) jacks (p. 13, 14): Connect your satellite or cable TV tuner to the COAXIAL jack. The OPTICAL jack is for the audio signal from your TV when your TV is not ARC (Audio Return Channel) supported.
The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the front panel of this unit during operation. Within 6 m (20 feet) • Notes on batteries • Change both batteries when tile operation range of tile remote control decreases. • Use AAA, R03, UM-4 batteries. • Make sure that the polarities are correct. Refer to the illustration inside the battery compartment.
!i!iiiii{iiiiii _D;¸D_I{_I _i _ii:ii:i;iiii_''_iii!iiiiIiiii!!iii'iii ¸_¸_iiii_iiiii_ii!_ii!_i!i_iiiiii_iiiiiiiiiii_i_iiii_:_jji!;ii;iiii_ii_iiiiH_{i{{i_iii_i{iiiiii!_i_iiiiiiI_!_!_i_i_iii_iiiiii;ii:_:i_;iiiii_i _i _;_;_!iiii}i{iil! ! 1:211:k !2122 L::iLl 21¸¸¸¸¸¸¸¸¸¸¸iii:ii ......... • Disconnect • When / FR the power connecting impedance .........
• Connecting speaker cables Each speaker has two speaker cables. One is for connecting the - (negative) terminal of the unit and the speaker, and the other is for the + (positive) terminal. The cables are different colors, so they do not get mixed up. Connect the black side to the - (negative) terminal and the other side to the + (positive) terminal. 1 Remove approximately 10 mm of insulation from the end of the speaker cable and twist the bare wire firmly. 2 Press the tab on the speaker terminal down.
_qi(if_qiNi- Make sure you refer the following illustration carefully so that connections between this unit and your TV are properly made. [__'l#*ireJt't Do not connect the power cable of this unit until all connections are completed. O Connect your TV using an HDMI cable (commercially available). The digital video signal is output from this unit to your TV.
• Video connection • Firmly connect the composite video cable (supplied) to the VIDEO jack. • Refer to page 41 for information on the video output formats. You can connect player, audio devices (such as a CD player, MD etc.) to the unit. • ff you play back the image via VCR, the image may deteriorate due to the copy guard function. • To enjoy BD 3D discs on this unit, you need to connect a TV and this unit using HDM[ cables (commercially available).
• PC contents can be played back by connecting this unit to the network. • You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-Live compatible discs. Refer to page 28 for information on BD-Live functions. • Firmly connect a network cable (commercially available) to the NETWORK terminal. • Use only all STP (shielded twisted pair) network cable. • When using the internet, a broadband internet connection as shown below' is required.
• You can transmit and receive the remote control signals by connecting to the REMOTE CONTROL (OUT/IN) jacks. • Firmly connect monaural 3.5 mm mini plug cables (commercially available) to the REMOTE CONTROL (OUT/IN) jacks. Alter all connections are completed, plug the supplied power cable into the AC IN on the rear of this unit. Then plug into AC outlet. _/_,I#21 i/'eJAv! Do not connect the power cable of this unit until all connections are completed.
Initial Wizard/Easy Setup allows you to set language, resolution, and screen aspect ratio easily. Initial Wizard screen is displayed when you turn this unit on for the first time after purchase or upgrade. Same setting can be performed from SETUP menu -+ [System] -+ [Easy Setup] (p. 33). 1 2 When Easy Setup screen is displayed, press ENTER to start Easy Setup. 4 Press press "[TV Easy 5 Press ENTER to exit Easy Setup. A/V to select the screen aspect ratio, then ENTER.
Follow the _rocedures below to play back the source. Set the source input 3 Refer to the following operations pages for more % Disc p. 20, 24 Front Rear iiiiiiiiiiiiii_i_i_i_i_i_i_i_i_i_i_i! ¸ iiiiiiii!!i!i!ii!iilD!! % USB ':l © (PC contents, YouTube and Netflix) % p. 15, 22 ,M • Some devices • Playability • The reading • Yamaha may not work properly of and power time 18 En may exceed and suppliers As a precaution, supply accept even if they meet the requirements.
2,,Switch input i+!!_!!!!!Setthesource the 3 Refer to the following operations pages for more @Wa_HA i Podl p. 12, 24 AUX To AUX p. 14 STB To COAXIAL F_ I _ For details instruction connected I on operation, refer to the manual supplied with the device. p. 14 Portable p. 14 To output TV sounds, refer to page 13 for connection. TV FM ,i_1 Some To receive FM radio stations, refer to page 29. features may not be available depending on the model o1"the software version of your iPod.
l:Y:T_][wJ[e]'_:l;f:¥1[e]A _ • HOME and MEDIA multi-media menus allow you to browse files on data discs, USB memory and play devices and Common operations for playing back files in a selected folder Example: Selecting a movie file on a USB memory device your network. For details • on playable discs and files, Stop the playback screen, refer to page 3. Basic operation 1 of the video before you move to MEDIA menu Press HOME to move to HOME menu screen.
:fiFl[ql'lit _i_illPli-4 Select the Photo, Music, Video or AVCHD folder you want to play back, then press ENTER. To return to the parent folder, press _1 or select El" Note that the only the file type selected displayed ill the following Photo folder step. When step and select 5 if you selected files are displayed you want to play back other than photo, after containing When a video When a music displayed and When a photo file is selected, playback starts.
l:Y:T_][wJ[e]'_:l;f:¥1[e]A _ 3 • Select the file you want to play back. About DLNA This unit is a DLNA can manage photo, certified music digital media DLNA servers on your home network. DLNA (Digital Living sharing of digital you can enjoy Network digital contents device network provides servers, some settings Media Player a DLNA 12, and share Turn on the PC with DLNA or the DLNA network. device Press HOME to server or as USB memory devices may not be shared properly.
• Playing video from Netflix _M You can instantly watch movies and TV episodes from Netflix over the internet using this Player. To become a Netflix member, visit http://www.netflix.com. Checking the activation code Before you watch videos from Netflix, you need to get an activation code displayed on your TV. 1 Press HOME to display HOMEmenu screen. HOME menu screen may differ depending on the model. 2 Press 4/_ to select [NETFLIX], then press ENTER.
l : Y:T_l[wl[e] "J:l ; f : ¥1[e] A_ • Repeat play You can repeat You can operate playback of your iPod by using the buttons on the remote control. Press playback REPEAT repeatedly Each press cycles DISPLAY as you want. for repeat play. as follows: REPEAT ONE "=_REPEAT ALL "=_REPEAT OFF You can also operate || • Some features the software • may not be compatible version depending on the model o1" of your iPod. Press any buttons 1 Press any buttons I= : Stops playback.
This chapter BD/DVD/CD explains playback of commercially discs, and recorded DVD-RW/R For the basic playback operation, refer to page available discs. 6. | - Normal - Shuffle Shuffle Shuffle - Random Random Random CH (chapter) TT (title) All CH (chapter) TT (title) All _r=-avi f_lwNM_ To display On Screen menu, press ON SCREEN. After that, press A/V/4/I_ to select an item, then press ENTER to operate the desired function.
This shows various settings, such as subtitles, angle settings and the title/chapter/track number currently played back. To display Status menu, press STATUS. Status menu contains following menus. Example: Icons when playing a music file Example: Icons when playing a BD disc ® ® _ (Playback status) @ _(Repeat (p. 6). @ [] _ mode): Shows current repeat mode (Disc type/music file icon) (Playback status) OMv (Disc type/video file icon) (Artwork) III_I!L'R_: Displays artwork it the file contains it.
2 Press ENTER to program For audio disc, press This allows the video. you to set Bookmark After Bookmark at the specified point of then press is set, you can move to the point you set using this function. Bookmarks. You can set up to 12 playback A/V order. to select a desired track, ENTER. For DVD-Video discs, select a desired TT) and chapter (shown To clear a set track, title (shown as CH) instead as of a track. select the track you want to clear, then press CLEAR.
• Press A/V or number buttons to set/adjust the value of the focused item, and press ENTER to jump to the specified point. 4 To close the status bar, press STATUS. Using the feature of BD-Live 1 Set the Network 2 Connect setting (p. 37). the USB memory device • BD-Live data is saved connected to this unit.
• Manual preset tuning 1 Select a favorite radio station by pressing << / >> (TUNING). 2 PressMEMORY. 3 Select the preset number you want to store to by pressing •IT or < / > (PRESET). 4 Press ENTER. "<, >> (TUNING) 1 Press TUNER. 2 Press and hold << / >> (TUNING). The manual preset is complete. _%,._ Automatic tuning starts. _%,._ [1"the signal received from the station you want to select is weal<, you can also tune into radio stations manually by pressing << / >> (TUNING) repeatedly.
You can delete ([PRESET a preset station by using the option menu DEL]). OPT ON i iiiiiiiii_iiiiiiiiill iii iii!_i,i,i,i,i,i,!!i_ •E"TE" 1 Press OPTION. 2 Press 3 Select the preset ENTER. pressing number you want to delete by A/V. 4 Press 5 Press OPTION ENTER," to exit option menu. '_To delete additional preset number, repeat steps 2 to 4. ?_t [PRESET DEL] is displayed on the front panel display only when the input source is set to FM.
You can set the sleep timer by using the remote control. The sleep timer sets this unit to standby mode after the specified time elapses. You can also enjoy the following function. • When you start playback of DVD/BD discs other than CD discs on this unit or display HOME/SETUP menu screen, the input selector of the TV is switched to this unit automatically (One Touch Play).
• Registering HDMI components to TV 1 Select this unit as the input source of the TV. 2 Select Disc/USB/Network unit. 3 Check that the image from this unit is correctly displayed on the TV. 4 as the input source of this Check that the HDMI control function works (turn on this unit or adjust the volume level using the TV remote control). -4'-For some HDM[ components, you only need to set the HDM[ control function. Registering HDM[ components to TV is not required ill this case.
The SETUP menu enables various audio/visual Menu/Submenu System General Setting settings 3(, Auto Power Off Disc/USB/Net: Sets auto power off mode to On/Off. Other Inputs: Sets auto power off mode to on by hours or Oft'. 36 Disc Auto Playback Sets this unit to start disc playback 36 HDM! Sets this unit to receive control of your TV. Screen Saver Control Control via Ethernet 36 to On/Off.
Menu/Submenu Item Tv Display Setting Video Audio Audio Setting Process Output Speaker Setting Post Process Function Page 3D Output Selects 3D or 2D _.ideos. TV Screen Sets the screen aspect ratio of the connected the video output. Video Out Select Selects the resolution TV System Selects the TV System Color Space Selects Color Space from YCbCr RGB/RGB. HDMI Deep Color Selects HDMI 1080p 24Hz Sets HDM] HDMI 38 TV, and adiust 38 38 of video output. 38 from NTSC/PAL/Multi.
q=ilq+l++l'+i'|'- 3 You need to display SETUP menu screen to perform settings for this unit. The following is the explanation basic operations of SETUP menu. Select a menu item. Press A/V to select [Parental ENTER or cursor 1.. Control], then press for Numeric buttons SETUP ENTER Example: Setting [Parental 4 Enter password. Enter your password with Numeric buttons. - The default password is 0000. - You cannot move to the next setting screen until you have input the correct password.
[Upgrade] You can upgrade the software manually from [USB Storage] or [Network]. For details on software upgrade, refer to "SOFTWARE UPGRADE" (p. 42). The default settings are marked with ..... . • System [Screen Saver] You can set the screen saver to [On]/[Off]. When set to [On], this unit will switch to screen saver mode if there is no operation for 3 minutes. On*, Off [Auto Power Off] You can set auto power off mode to [On]/[Off] when the input is selected to Disc/USB/Network.
q=lllqill+/qi,|r• Playback [Closed Caption] You can set to display the closed caption (p. 51 ) when a BD/DVD disc with closed caption is played back. On*, Off [Angle Mark] You can set to display the Angle Mark (_) when a BD/ DVD disc with multiple angles is played back. On*, Off [PIP Mark] You can set to display the PIP Mark (F_-]) when a BD disc with picture in picture (p. 28) is played back.
[Video Out Select] You can select the video output resolution from [Composite], [HDMI Auto], [HDMI 1080p], [HDMI 1080i], [HDMI 720p], [HDM1480p/576p], and [HDMI 480i1576i]. When set to [HDMI Auto], resolution is set to the maximum resolution according to the connected TV. For more details on output formats, refer to "About the video output formats" (p. 41 ). The default settings are marked with ..... . • TV [3D Output] You can select 3D or 2D video output from this unit.
q=ilqill+/qi'|' [HDM11080p 24Hz] This outputs the BD-Video encoded in 24Hz frame rate in HDMI 1080p 24Hz. Smoother video playback may be available with this function. This function is available when your TV supports this function, and this unit is connected with an HDMI cable. For more details on output formats, refer to "About the video output formats" (p. 41). [Color Adjust] You function, setting Brightness/Saturation/Hue set [Video items, The default for each refer Mode] To use to [Custom].
IN=flq_i_=r_ I 3 Press [2ch RETURN You can select The default settings are marked with ..... . to go back to speaker selection. Downmix] down mix method to 2-ch from [Stereo] or [Lt/Rt]. • Audio Output [HDMI] You can select the output mode of the HDMI terminal. Stereo* Changes channel output to stereo, which only delivers sound t_om the two front speakers. Lt/Rt Select this item if this unit is connected to a Dolby Pro Logic decoder.
q:llqiil+/qi'Ir - When [TV System] is set to [NTSC] Playback BD others VIDEO Playback BD 480p Max 480i 480p 480i OFF 480i 480i 576p Max 576i 576p 576i OFF 576i 576i 720p 60 Hz 1080p 60 Hz OFF others When [TV System] is set to [PAL] Playback BD others Playback VIDEO 720p 50 Hz 1080p 50 Hz BD OFF others When [TV System] is set to [Multi] When [TV System] is set to [Multi], vide() signal is output at the same frequency as the source.
Some of the newly released back unless version. you upgrade BD discs cannot this unit software We recommend upgrading be played to the latest the software of this unit with software upgrade so that the unit is operated based on the latest software. To check for the availability of a software upgrade, visit http://download.yamaha.
Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. No power. Press on the front panel to turn on the power.
Dt;[o111_l=g."t_[olo_lth_[_ Incorrect No picture. cable connections. Make sure that the cables are connected Make sure that the connected correctly. TV is set to the correct 13 13 input. Connect this unit to the TV with VIDEO jack using the supplied video pin cable. If picture is still not displayed with this unit connected to the VIDEO jack, press and hold _-/| | and _=_ on the front panel simultaneously for around 5 seconds when no disc is inserted and playback TV system to switch NTSC/PAL.
rKojq=l_.'lKo_o}ll{i,p FM stereo noisy. reception is The desired station cannot be tuned into with the automatic tuning The antenna is connected improperly. Check the antenna connections. The characteristics of FM stereo broadcasts cause this problem when the transmitter is too far away or the antenna input is poor. Try using a high-quality The signal is too weak. Use a high-quality Switch to monanral Use the manual 11 directional FM antenna. mode. -29 directional FM antenna.
No sound. The iPod is not connected correctly. Connect the iPod and this unit by a USB cable correctly. 12 The iPod sounds, but you cannot operate it with this unit or the remote control. No sound iPod from of your the TV. This unit cannot operated by the remote control, be No sound of your iPod can be outpnt from this unit to the TV through the HDM] cable. Use the speakers The iPod is not supported by this unit.
f_ojq=l¢_qi_ojoltlllg' • General No sound or distorted sound. The sampling rate of an audio or video file is not compatible with this unit. Check that the sampling rate and bit rate of an audio or video file are compatible with this unit. 3 Audio may not be output depending on the audio recording status, such as when audio other than an audio signal or non-standard audio is recorded for the audio content. 3 There is no sound during still mode, slow motion playback, fast forward and fast reverse.
Dl[='[o111.'llaL"i_[oIo_[t • Picture Screen freezes operation not work. and buttons Press do This unit needs to be restarted. Ill , then restart playback. Turn off the power and turn on the power again. Press and hold (-I_ on the front panel for around seconds to restart this unit. Video is not output with the desired resolution. Resolution Wide-screen video appears vertically stretched, or black bands appear at the top and bottom of the screen. Or 4:3 video Aspect is set incorrectly.
ri_ojq=l_..li_o_o}ll{i,p Cannot download BD-Live contents. Incorrect cable connections. Connect Incorrect USB de_.ice connections. Connect the USB memory device properly. Check that the USB memory device is connected to the USB port of this unit. The BD disc does not support The network BD-Live. setting is incorrect. The USB memory compatible. device is not There is insufficient free space on the USB memory device, the Network cable properly. 15 Check if the BD disc supports BD-Live.
IIl='fo111.'ll_g."t_[oIo_lff_[_ The following messages appear on the TV screen in case the disc you tried to play back is not appropriate or the operation is not correct. Unsupported Wrong Network region The file is not supported code! FAILED. by this unit. The disc is an incompatible Refer to "Types of discs/files this unit". region code. Refer to "Region This unit cannot network. be connected to the Check connection Network is OK,proxy has FAILED. This unit cannot proxy server.
AVCHD AVCHD is a new format (standard) for high definition video cameras that can be used to record and play highresolution HD images. BD-Live BD-Live is a BD standard that utilizes a network connection, enabling this unit to go online to download promotional videos and other data. BDMV BDMV (Blu-ray Disc Movie, BD-MV) refers to one of the application formats used for BD-ROM which is one of the Blu-ray Disc specifications. BDMV is a recording format equivalent to DVD-Video of the DVD specification.
x.v.Color x.v.Color reproduces a greater range of color than before, showing ahnost all of the colors that the human eye can detect. menu In a BD-Video/DVD-Video, this is the menu for selecting things like the chapter to be played back and the subtitle language. In some DVD-Videos, the top menu may be called the "Title Menu". PLAYER SECTION INPUT/OUTPUT • HDM] iPod/iPhone • Supported iPod/iPhone ................................................
'/i'g*//i'I%IiN/f" • Copyright • iPhone, iPod, iPod classic, iPod nano, and iPoct touch are trademarks of Apple Inc., registered ill the U.S. and other countries. "Made for iPod," and "Made for iPhone" mean that all electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Information about software This product uses the lollowing software. For inhmnation (copyright, etc) about each sot_walx:, read the original sentences stated below. • About kinux, Busybox, SquashFS, GNU GENERAL Version PUBLIC LIRC, U-boot LICENSE 2, June 1991 Copyright (C) 1989, 1991 Free Soltware Foundation, Inc. 51 Franklin St, Fiflh Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute but changing il is not allowed.
This section intended tomake thoroughly clear what isbelieved tobe aconsequence , 1 April oflhe rest ofis this License. Ty Coon, President of Vice 8.
GNU LESSER GENERAL TERMS PUBLIC AN[) CONDIT[ONS FOR COPYING, MODIFICATION L[CENSE D[STR[BUTION AN[) 0. This License Agreement applies to ally soltware library or olfer program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you".
9. You alv not required to accept this License, since you have not signed it. However, nothing else grants you permission to modily or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therelore, by modit)dng or distributing the Library (or any work based oil the Library), you indicate your acceptance of this License to do so, and all its terms and condili(ms tk}r copying, distributing or modilying the Library or works based on it. 10.
Original SSLeay License Copyright (C) 1995-1998 Eric Young (eay@cuptsolt.com) All rights reserved. This package is an SSL implementation wrdten by Eric Young (eay@cryptsoft.con0. The inlplementation was written so as to conlonn with Netscapes SSL. This library is lree lot comnlercial and non-commercial use as long as the ti)llowing conditions are aheamd to. The tbllowing conditions apply to all code lound in this distributiom be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code.
• About Expat Copyright ((') 1998, 1999, 20(g} Thai Open Source Soltware and Clark Cooper Copyright Center Lid (C) 2(}01, 2002. 2(}03, 2004, 2(}05, 2006 Expat maintainers.
Communications of the ACM, April 1991 (voh 34 no. 4), pp. 3{)-44. (Ac[iacent articles in that issue discuss MPEG motion picture compression, applications of JPEG, and related topics.) If you don't have the CACM issue handy, a PostScript file containing a revised version of Wallace's article is available al http://www.ijg.org/files/ wallace.ps.gz. The file (actually a preprint R)r an article that appeared in IEEE Trans.
Sam Bushell source code samples/webserver. license has to be obtained Magnus Holmgren To use all of the software commercially, a commercial lroll/www.genivia.com. Greg Roelols Tom 1 DEFINITIONS. Tallner libpng versions 0.5, May 1995, through (}.88, January 1996, are Copyright (C) 1995, 1996 Guy Eric Schalnah Group 42, Inc.
The Modifications which You create or to which You contribute are governed by the terms of this License, including without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of lhis License or a luture version of this License released under Section 6.1, and You musl include a copy of this License with every copy of the Source Code You distribute.
As between Initial Developer and the Contributors, each party is responsible lor claims and damages arising, directly or indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute ally adnfission of liability. EXHIBIT A. "The contents of this file are subject to the gSOAP Public License Version 1.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result ill hazardous radiation exposure, LASER Specification: Class 1 LASER Product Wave length: Laser output: 790 nm (CDs)1658 max. 1 mW The laser component in this product exceeding the limit for Class 1.