Operation Manual

ManualsBrandsYamaha ManualsMotorBT1100

1. Screw (x 2)

2. Cowling

PERIODIC MAINTENANCE AND MINOR REPAIR

2

1

1

2

1

1

EAUB0013

Replacing the headlight and

auxiliary light bulb

This motorcycle is equipped with a quartz

bulb headlight. If the headlight bulb or aux-

iliary light bulb burns out, replace it as fol-

lows.

NOTE:

Skip steps 6-10 if only the headlight bulb is

being replaced. Skip steps 2-5 if only the

auxiliary light bulb is being replaced.

1. Remove the headlight by removing

the screws, then tilt the cowling for-

ward.

2. Disconnect the headlight coupler and

the auxiliary light leads, and then re-

move the headlight bulb cover.

3. Remove the headlight bulb holder by

turning it counterclockwise, and then

remove the defective bulb.

EW000119

WARNING

0

Headlight bulbs get very hot. There-

fore, keep flammable products away

from a lit headlight bulb, and do not

touch the bulb until it has cooled down.

4. Place a new bulb into position, and

then secure it with the bulb holder.

EAU00462

6-29

6

1. Headlight bulb cover

2. Auxiliary light bulb holder

1. Headlight coupler