Operation Manual

SCOOTER CARE AND STORAGE
7-3
After cleaning
1. Dry the scooter with a chamois
or an absorbing cloth.
2. Use a chrome polish to shine
chrome, aluminum and stain-
less-steel parts, including the
exhaust system. (Even the ther-
mally induced discoloring of
stainless-steel exhaust systems
can be removed through polish-
ing.)
3. To prevent corrosion, it is rec-
ommended to apply a corrosion
protection spray on all (even
chrome- and nickel-plated)
metal surfaces.
4. Use spray oil as a universal
cleaner to remove any remain-
ing dirt.
5. Touch up minor paint damage
caused by stones, etc.
6. Wax all painted surfaces.
7. Let the scooter dry completely
before storing it or covering it.
EWA00002
w
Make sure that there is no oil or wax
on the brakes and tires. If necessary,
clean the brake discs and linings
with a regular brake disc cleaner or
acetone, and wash the tires with
warm water and mild soap. Then,
carefully test the scooter for its brak-
ing performance and cornering be-
havior.
ECA00013
cC
9 Apply spray oil and wax spar-
ingly and wipe off any excess.
9 Never apply oil or wax on rub-
ber and plastic parts, but treat
them with a suitable care prod-
uct.
9 Avoid using abrasive polishing
compounds as they wear away
the paint.
NOTE:
Consult a Yamaha dealer for advice
on what products to use.
4VP-F8199-E1.pm65 2/4/2004, 4:21 PM53