User Manual

26
Maintenance
2. Apply a little rotor spindle oil to the rotor
spindle and receiver.
3. Apply a little lever oil to each linkage of the
lever assembly.
* Remove excess oil and use a gauze cloth to
clean the smaller parts.
■ Once or Twice a Month Main-
tenance
● Valve Slide Maintenance
1. Depress the valve levers and remove the
valve slides.
2. Wrap a cleaning rod with a gauze cloth leav-
ing no bare metal exposed, and remove dirt
from the valve slides and the insides of the
outer pipes.
3. Use the gauze to remove dirt from the sur-
face of the valve slide, then apply a little
slide grease.
4. Slide the valve slide in and out a few times
to distribute the grease evenly. Then wipe
off any extra grease that comes off the slide.
horn_om_003-074_080711.pm 08.9.22, 1:54 PMPage 26 Adobe PageMaker 6.5J/PPC