User Manual

22
Before Playing
■ Assembling the Instrument
1. After confirming that the slide lock is locked,
hold the slide by the slide brace and rest
the bumper on the floor.
2. Use your other hand to hold on to the bell
section.
* Make sure you hold on to the bell section
close to the slide receiver. If you hold on to
the tuning slide, the tuning slide may come
off or poor stability may result in the
instrument being bumped.
3. Attach the slide section to the main bell
section. Attach the slide so that it is at a
suitable angle when you play.
4. After attaching, tighten the slide receiver to
secure the slide in place.
Receiver
Slide
Receiver
Slide
Stopper
* After assembly is complete, make sure that
the slide brace is used to hold the
instrument. Also, handle the instrument
with care, being careful not to bump or
damage it.
■ Attaching the Mouthpiece
Insert the mouthpiece until it just fits snugly in
the mouthpiece receiver and is no longer loose.
* Never insert the mouthpiece with force or
unnecessary strength. The mouthpiece
may become stuck in the receiver.
Trombone_om_003-072_080707.pm65 08.7.8, 9:48 AMPage 22 Adobe PageMaker 6.5J/PPC