Owner’s Manual

31
English
Lowering the volume level
momentarily
Press the AUDIO MUTE switch to reduce the current
volume level by approximately 20 dB. Press the switch
again to restore the previous volume level.
Adjusting the tone
Adjust the volume level balance between the left and
right speakers using the BALANCE control.
Adjust the volume level of the high and low ranges using
the BASS and TREBLE control.
Note
• If both BASS and TREBLE controls are set to the center,
the audio signal will bypass the tone control circuit.
• The BASS, TREBLE, and BALANCE control settings will not
aect the input signals at the EXT. IN jacks nor the output
signals at the LINE 2 OUT (recording) jacks.