User Manual


188
MIDI Data Format
Appendix
A-7
<Table 1-4>
MIDI Parameter Change table (MULTI PART) [XG]
Address Size Data Parameter Description Default value
(H) (H) (H) (H)
08 nn 00 1 00 - 20 ELEMENT RESERVE 0 - 32 part10=0, other =2
nn 01 1 00 - 7F BANK SELECT MSB 0 - 127 part10=7F, other=0
nn 02 1 00 - 7F BANK SELECT LSB 0 - 127 00
nn 03 1 00 - 7F PROGRAM NUMBER 1 - 128 00
nn 04 1 00 - 0F, 7F Rcv CHANNEL 1 - 16,OFF part no.
nn 05 1 00 - 01 MONO/POLY MODE 0:MONO 01
1:POLY
nn 06 1 00 - 02 SAME NOTE NUMBER KEY ON ASSIGN 0:SINGLE 1 (all part)
1:MULTI part10=2, other=0
2:INST (for DRUM)
nn 07 1 00 - 03 PART MODE 0:NORMAL 00 (other than Part10)
1:DRUM 02 (Part10)
2-3:DRUMS1 - 2
nn 08 1 28 - 58 NOTE SHIFT -24 - +24 [semitones] 40
nn 09 2 00 - FF DETUNE -12.8 - +12.7 [Hz] 08 00
nn 0A 1st bit3-0→bit7-4 (80)
2nd bit3-0→bit3-0
nn 0B 1 00 - 7F VOLUME 0 - 127 64
nn 0C 1 00 - 7F VELOCITY SENSE DEPTH 0 - 127 40
nn 0D 1 00 - 7F VELOCITY SENSE OFFSET 0 - 127 40
nn 0E 1 00 - 7F PAN 0/random, 1/L63-64/C-127/R63 40
nn 0F 1 00 - 7F NOTE LIMIT LOW C-2 - G8 00
nn 10 1 00 - 7F NOTE LIMIT HIGH C-2 - G8 7F
nn 11 1 00 - 7F DRY LEVEL 0 - 127 7F
nn 12 1 00 - 7F CHORUS SEND 0 - 127 00
nn 13 1 00 - 7F REVERB SEND 0 - 127 40
nn 14 1 00 - 7F VARIATION SEND 0 - 127 00
nn 15 1 00 - 7F VIBRATO RATE -64 - +63 40
nn 16 1 00 - 7F VIBRATO DEPTH -64 - +63 40 (drum part ignores)
nn 17 1 00 - 7F VIBRATO DELAY -64 - +63 40 (drum part ignores)
nn 18 1 00 - 7F FILTER CUTOFF FREQUENCY -64 - +63 40
nn 19 1 00 - 7F FILTER RESONANCE -64 - +63 40
nn 1A 1 00 - 7F EG ATTACK TIME -64 - +63 40
nn 1B 1 00 - 7F EG DECAY TIME -64 - +63 40
nn 1C 1 00 - 7F EG RELEASE TIME -61 - +63 40
nn 1D 1 28 - 58 MW PITCH CONTROL -24 -+24 [semitones] 40
nn 1E 1 00 - 7F MW FILTER CONTROL -9600 - +9450 [cent] 40
nn 1F 1 00 - 7F MW AMPLITUDE CONTROL -64 - +63 40
nn 20 1 00 - 7F MW LFO PMOD DEPTH 0 - 127 0A
nn 21 1 00 - 7F MW LFO FMOD DEPTH 0 - 127 00
nn 22 1 00 - 7F MW LFO AMOD DEPTH 0 - 127 00
nn 23 1 28 - 58 BEND PITCH CONTROL -24 - +24 [semitones] 42
nn 24 1 00 - 7F BEND FILTER CONTROL -9600 - +9450 [cent] 40
nn 25 1 00 - 7F BEND AMPLITUDE CONTROL -64 - +63 40
nn 26 1 00 - 7F BEND LFO PMOD DEPTH +100 - +100 [%] 40
nn 27 1 00 - 7F BEND LFO FMOD DEPTH +100 - +100 [%] 40
nn 28 1 00 - 7F BEND LFO AMOD DEPTH +100 - +100 [%] 40
TOTAL SIZE 29
nn 30 1 00 - 01 Rcv PITCH BEND 0/OFF, 1/ON 01
nn 31 1 00 - 01 Rcv CH AFTER TOUCH (CAT) 0/OFF, 1/ON 01
nn 32 1 00 - 01 Rcv PROGRAM CHANGE 0/OFF, 1/ON 01
nn 33 1 00 - 01 Rcv CONTROL CHANGE 0/OFF, 1/ON 01
nn 34 1 00 - 01 Rcv POLY AFTER TOUCH (PAT) 0/OFF, 1/ON 01
nn 35 1 00 - 01 Rcv NOTE MESSAGE 0/OFF, 1/ON 01
nn 36 1 00 - 01 Rcv RPN 0/OFF, 1/ON 01
nn 37 1 00 - 01 Rcv NRPN 0/OFF, 1/ON XG=01, GM=00
nn 38 1 00 - 01 Rcv MODULATION 0/OFF, 1/ON 01
nn 39 1 00 - 01 Rcv VOLUME 0/OFF, 1/ON 01
nn 3A 1 00 - 01 Rcv PAN 0/OFF, 1/ON 01
nn 3B 1 00 - 01 Rcv EXPRESSION 0/OFF, 1/ON 01
nn 3C 1 00 - 01 Rcv HOLD1 0/OFF, 1/ON 01
nn 3D 1 00 - 01 Rcv PORTAMENTO 0/OFF, 1/ON 01
nn 3E 1 00 - 01 Rcv SOSTENUTO 0/OFF, 1/ON 01
nn 3F 1 00 - 01 Rcv SOFT PEDAL 0/OFF, 1/ON 01
nn 40 1 00 - 01 Rcv BANK SELECT 0/OFF,1/ON XG=01, GM=00
nn 41 1 00 - 7F SCALE TUNING C -64 - +63 [cent] 40