Owner`s manual

Setup Menu
To start program playback
Programming disc tracks (not for
Picture CD/MP3)
8 Use .... ~. T to highlight [START] on the
You can play the contents of the disc in the
program menu, then press ENTER/OK.
~ Playback will start with the selected
order you want by programming the tracks
tracks
under the programmed
to be played. Up to 20 tracks can be
stored.
sequence.
In 'GENERAL SETUP PAGE', press. T to
To exit program playback
highlight [PROGRAM], then press ~ to
9
Use .... ~. T to highlight [EXIT] on the
select [INPUT MENU].
program menu,
then press ENTER/OK.
2
Press ENTER/OK to confirm.
To input your favorite tracks/chapter
OSD Language
3
Use
the numeric buttons to enter a valid
This menu contains various language
track/chapter number.
options for display language on the screen.
For details,
see page 11.
Screen Saver
This function is used to turn the screen
saver
on or off.
In 'GENERAL SETUP PAGE', press. T to
4
Use
.... ~. T to move the cursor to the highlight [SCREEN SAVER], then press~.
next position.
ON
~ If the track number is more than ten,
Select this
if you wish to turn off the TV
press
~ to open the next page and
screen when disc playback is stopped or
proceed with programming or,
paused for more than 15 minutes.
~ Use .... ~. T to highlight [NEXT] on the
OFF
program menu, then press ENTER/
OK.
Select this to disable the screen saver
function.
S
Repeat steps
3-4 to input another track/
2
Press. T to select a setting, then press
chapter number.
ENTER/OK to confirm your selection.
If you want to remove a track
6
Use .... ~. T to move the cursor to the
track you want to remove.
7
Press ENTER/OK to remove this track
from the program menu.
24
Setup Menu
To start program playback
Programming disc tracks (not for
Picture CD/MP3)
8 Use .... ~. T to highlight [START] on the
You can play the contents of the disc in the
program menu, then press ENTER/OK.
~ Playback will start with the selected
order you want by programming the tracks
tracks
under the programmed
to be played. Up to 20 tracks can be
stored.
sequence.
In 'GENERAL SETUP PAGE', press. T to
To exit program playback
highlight [PROGRAM], then press ~ to
9
Use .... ~. T to highlight [EXIT] on the
select [INPUT MENU].
program menu,
then press ENTER/OK.
2
Press ENTER/OK to confirm.
To input your favorite tracks/chapter
OSD Language
3
Use
the numeric buttons to enter a valid
This menu contains various language
track/chapter number.
options for display language on the screen.
For details,
see page 11.
Screen Saver
This function is used to turn the screen
saver
on or off.
In 'GENERAL SETUP PAGE', press. T to
4
Use
.... ~. T to move the cursor to the highlight [SCREEN SAVER], then press~.
next position.
ON
~ If the track number is more than ten,
Select this
if you wish to turn off the TV
press
~ to open the next page and
screen when disc playback is stopped or
proceed with programming or,
paused for more than 15 minutes.
~ Use .... ~. T to highlight [NEXT] on the
OFF
program menu, then press ENTER/
OK.
Select this to disable the screen saver
function.
S
Repeat steps
3-4 to input another track/
2
Press. T to select a setting, then press
chapter number.
ENTER/OK to confirm your selection.
If you want to remove a track
6
Use .... ~. T to move the cursor to the
track you want to remove.
7
Press ENTER/OK to remove this track
from the program menu.
24