Technical information

Chapter 11: User Programmable Functions
188
Settings For Each Voice
Chan. A 1-instrument harmony will use Channel A only. Additional instruments can use Channel B and C.
Tip: These channels are set to numbers in the Harmony Channels Dialog box, accessible by selecting the [Harmony] button
under the Opt | MIDI Channels, options… menu.
Octave This allows the harmony to “drop-down” or “go up” by a number of octaves. This octave change will only
happen in a certain range, as chosen in the LOW, HIGH settings.
Tip: There is also an Overall Harmony Octave setting that changes the octave of the entire harmony setting (accessible by
pressing the [More] button).
O. Double (Octave Double) This setting lets you double any voice. Usually you want to do this by doubling an
octave below (i.e. octave = -1), but you can set the octave from -2 to +2. The doubling will always be on the same
channel, if you want a different instrument to double the voice, and then use the Melody Doubling Voices.
V. Boost (Velocity Boost) This allows you to increase or decrease the velocity (loudness) of each voice, to make the
voice stand out more or less in the harmony. Default = 0.
The Patches setting at the bottom allows you to assign a patch to the harmony. If
you set “No patch,” the harmony won't change the patch. This is a useful setting
for making a generic harmony that doesn't change the patch of the Melody or Thru channel, for example.
Changes that you make to the harmony settings won't take effect until you press the [Update] button.
You may Copy a Harmony to the clipboard, and then move to a new harmony and
Paste the harmony to the new location.
Because the harmony is saved automatically for you, you won’t need to ever press
these buttons.
All of the 256 harmonies are saved in a single .har file called DEFAULT.HAR. If you have run out of harmonies,
you can start a new harmony file by pressing the [Save As] button. For example, if you make a 3rd party disk of
add-on harmonies, save it as your name MYNAME.HAR. Then you can load in your bank of harmonies (from the
Harmonies | Edit a Harmonies File) without disrupting the existing DEFAULT.HAR file.
Each .har file has 256 harmonies, so you probably need only 1 DEFAULT.HAR for
all your harmonies. However, if you've made a great harmony and want to give it to
a friend, you can export a single harmony as an .h1 file. Your friend can then import this harmony into their own
.har file.
The best way to develop a harmony is to hear it as it’s playing. The preferred way to do this
is to have a song playing that has a melody in it. Any changes to the harmony will be heard
on the melody as soon as you press the [Update] button.
You can also play along as the song is playing, and hear the new harmony on the Thru channel.
If you don't want to have a song playing, and want to hear the harmony, then set the [Test Chord] to a certain chord.
If set to CMAJ7, then you can play on the MIDI keyboard (with no song playing) and hear your harmony. This
allows you to examine exactly what notes the program is using to make your harmony.