Technical information

Chapter 11: User Programmable Functions
191
10 easy steps to make a Soloist
1. Bring up the Soloist window by pressing the [Soloist] Button.
2. Select a blank spot in your list of soloists and press the [Edit] button.
3. Insert the title of your soloist and any memo note you wish to add. The Num field will be filled in for you. Call
this one Bebop Saxophone. The memo might say, “extra legato, straighter 8th notes, on top of the beat.”
4. Choose the type of soloist (i.e. swing 8th notes, straight 8th notes, 16th notes, etc.) This should be set to Swing
8ths.
5. Press the [Choose] button to select the instrument the soloist should play (i.e. Tenor Saxophone).
Tip: You may also select an instrument from the Patch Change window, but selecting an instrument with the [Choose]
button will also fill in the note range information specific to that instrument. You'll notice that the correct range for tenor
saxophone has been filled in to the Note Range settings.
6. Modify (if required) the phrase length, space length, and outside range parameters.
7. Change the Legato Boost to 10 %. This will add 10% to the duration of the notes. Press the [Help] button in
the Soloist Editor window if you require additional details.
8. Adjust the Lateness by -5. This will play the notes more “on the beat” than other Jazz soloists.
9. Adjust the 8th Note Spacing by -5. This will play the 8th notes in a more even feel than other Jazz soloists.
10. Press [OK], and you're done. Then, give the program a few moments to load its “knowledge base” of solo ideas
and new parameters, and a few moments more to analyze the chords. Playback will begin automatically as soon
as the Soloist has performed the operations mentioned above.
Custom Solo Generation
It is possible to generate and regenerate parts of the solo, so that you can redo any part of the solo that you don't
like.
This button in the Select Soloist Dialog launches the Generate Solo for a Specific Range of Bars
dialog.