User Manual

Input / Output characteristics
Analog Input Characteristics
0 dBu = 0.775 Vrms
Input Jacks
Actual Load
Impedance
For Use With
Nominal
Input level
Connectors
Sensitivity*1 Nominal
Max. before
clip
AUX 10 kΩ 600 Ω line
−14 dBu
(154.6 mV)
−8 dBu
(308.5 mV)
+2 dBu
(975.7 mV)
3.5 mm phone
jack *2
SMARTPHONE 10 kΩ 600 Ω line
−14 dBu
(154.6 mV)
−8 dBu
(308.5 mV)
+2 dBu
(975.7 mV)
3.5 mm phone
jack *3 (CTIA)
*1 Sensitivity is the lowest level that will produce an output of +0 dBu (0.775 V) or the nominal output level
when the unit is set to maximum gain. (All level controls are at their maximum position.)
*2 Tip = Signal L, Ring = Signal R, Sleeve = GND
*3 Tip = Signal L, Ring 1 = Signal R, Ring 2 = GND, Sleeve = Output for smartphone
Analog Output Characteristics
0 dBu = 0.775 Vrms
Output Terminals
Actual Source
Impedance
For Use With
Nominal
Output level
Connectors
Nominal Max. before clip
SMARTPHONE
(OUT)
150 Ω 1.5 kΩ line
−30 dBu
(24.51 mV)
−20 dBu
(77.5 mV)
3.5 mm phone jack
*3 (CTIA)
PHONES 120 Ω 40 Ω phone 1.5 mW + 1.5 mW 6 mW + 6 mW 3.5 mm phone jack
*3 Tip = Signal L, Ring 1 = Signal R, Ring 2 = GND, Sleeve = Output for smartphone
Digital Input / Output Characteristics
Terminals Format Data Length Fs Connector
USB
USB Audio Class 2.0 /
Yamaha Steinberg USB
Driver
24-bit
44.1 kHz, 48 kHz, 88.2
kHz, 96 kHz, 176.4 kHz,
192 kHz
USB Type-C
The contents of this guide apply to the latest specifications as of the publishing date.
69
Appendix > Input / Output characteristics