User's Manual

Chapter 5 Setting Up the Camcorder

5-13

Refitting the eyepiece

1 Align the match mark on the eyepiece locking ring with that on the

viewfinder barrel.

2 Align the match mark on the end of the eyepiece with that of the

eyepiece locking ring, then insert the eyepiece into the viewfinder

barrel.

3 Turn the eyepiece locking ring clockwise until its “LOCK”

indication arrow points to the match mark on the viewfinder barrel.

Note

When the eyecup is worn out, replace it with a new one (service part

number 3-723-079-03).

Match mark on the end of eyepiece