User's Manual

Chapter 5 Setting Up the Camcorder
5
5-23
6 Mount the microphone into the cradle suspension.
7 Connect the microphone cable to the AUDIO IN CH-1 or AUDIO
IN CH-2 connector. Set the corresponding AUDIO IN switch to
REAR.
Set the LINE/MIC/+48V ON switch to +48V ON or MIC in
accordance with the type of the microphone power supply.
If the microphone you connect to AUDIO IN CH-1 or CH-2 is of the
internal batteries type, set the appropriate LINE/MIC/+48V ON
switch to MIC.
If the microphone you connect to AUDIO IN CH-1 or CH-2 is of the
external power supply type, set the appropriate LINE/MIC/+48V
ON switch to +48V ON.
Microphone