Owner`s manual

CARD

3.3V

DATAPAG E

PAR T

ELEMENT

ABC12

SHIFT

ASSIGNABLE KNOB

LCD (Liquid Crystal Display)

This is a backlit 2-line display.

[PAGE] knob (Page 23)

Switches between screens in each Mode. Each Mode includes

several screens.

Knobs [A], [B], [C], [1] and [2] (Page 24)

In each Play Mode, these knobs mainly control the functions

respectively assigned to them. In each Edit Mode, each knob is

used to enter a value for the associated parameter shown in the

display. Depending on the operation or the screen you are working

in, these knobs will function differently.

Knobs [A] to [C] can be assigned to system control functions (Pages

46, 136). Knobs [1] and [2] can be assigned control functions that

affect Voices (Pages 47, 74).

[DATA] knob (Page 25)

Use this to increase or decrease the value of the parameter at which

the cursor is positioned.

[SHIFT] key (Page 23)

In Voice or Performance Play Mode, a screen for viewing or setting the

Octave parameter and the MIDI Transmit channel (Page 23) is shown

when you press the [SHIFT] key. In any of the Edit Modes, when

pressing this key while turning the [PAGE] knob, a menu screen is

displayed and you can quickly switch between Edit Mode screens

(Page 23). If while holding this key you turn one of Knobs [A] ~ [C], [1]

~ [2], [DATA] knob, or press either [INC/YES] or [DEC/NO] key, you can

move the cursor without a parameter value being changed (Page 24).

Basics

Section