User Manual
Table Of Contents
- PRECAUTIONS
- Main Features
- Included Accessories
- About the Manuals
- Using the PSR-SX900/SX700—A Broad Overview
- Contents
- Key Functions and Terms
- Panel Controls and Terminals
- Starting Up
- Display Structure
- Basic Operations
- Workflow Guide—For Performing on the PSR-SX900/SX700
- Playing with Styles—Setting Up
- Setting up Styles
- Optimum Panel Settings for the Current Style (One Touch Setting)
- Setting up Keyboard Parts
- Selecting a Voice for Each Keyboard Part
- Creating Original Organ Flutes Voices
- Setting up Keyboard Harmony/Arpeggio
- Setting up Multi Pads
- Memorizing Original Panel Settings to One Touch Setting
- Changing the Pitch of the Keyboard
- Setting up Assignable Controllers
- Playing with Styles—Operations While Performing
- Singing with Song Playback—Setting Up
- Singing with Song Playback—Operations While Performing
- Adjusting the Parameters of Each Part— Mixer
- Song Recording
- Storing and Calling up Custom Panel Setups—Registration Memory, Playlist
- Customizing for Optimum Performance
- System Settings
- Connections—Using Your Instrument with Other Devices
- Connecting a Microphone or Guitar ([MIC/GUITAR INPUT] jack)
- Using an External Speaker System for Playback (MAIN OUTPUT jacks, SUB (AUX) OUTPUT jacks (PSR-SX900))
- Listening to Audio Playback by the External Device through the Instrument’s Speaker
- Connecting Footswitches/Foot Controllers (FOOT PEDAL jacks)
- Connecting USB Devices ([USB TO DEVICE] terminal)
- Connecting to an iPhone/iPad ([USB TO DEVICE], [USB TO HOST], or MIDI terminals)
- Viewing the Instrument’s Display on an External Monitor (PSR-SX900)
- Connecting to a Computer ([USB TO HOST] terminal)
- Connecting External MIDI Devices (MIDI terminals)
- Function List
- Appendix
- Index
PSR-SX900/SX700 Owner’s Manual 65
2
Playing with Styles—Operations While Performing
Using the Multi Pad Synchro Start Function
You can also start Multi Pad playback by playing the keyboard or by starting Style playback.
1 While holding the MULTI PAD CONTROL [SELECT] button, press
the desired button or buttons from [1]–[4].
The corresponding buttons flash in red, indicating standby status.
2 Start playback of the Multi Pad.
• When [ACMP] is off, press any note, or play back a Style.
• When [ACMP] is on, play a chord in the chord section, or play back a Style.
If you enable standby for a Multi Pad during Style or Song playback, pressing any
note (when [ACMP] is off) or playing a chord in the chord section (when [ACMP]
is on) will start Multi Pad playback at the top of the next measure.
To cancel the standby status of the
selected Pad, carry out the same opera-
tion, or simply press the [STOP] button
to cancel the status of all Pads.
NOTE
When two or more Multi Pads are in
standby status, pressing any one of
them starts simultaneous playback of
all of them.
NOTE