User Manual

Marching Drum Carrier Owner's Manual

Adjusting the Carrier

When the height is not sufficient, change the arm

attachment positions on the belly plate. The height

can be adjusted in four levels.

1 Adjust the height of arm position.

2 Use the supplied hexagonal wrench to tighten the

two bolts. Fix the arm holders to the belly plate.

For more comfortable playing posture, the shoulder rests can be adjusted.

The belt helps to stabilize instrument while play-

ing. Pull on both ends to fasten the belt.

Do not engage in any operation other than

playing instrument while wearing the car-

rier. This can cause loss of balance and

result in injury.

Adjusting the arm position

Shoulder rests

Belt

Belly plate

Bolts

Hexagonal

wrench

Arm holder

Arm

 Adjusting the width  Adjusting the angles

When set to the most forward:

When set to the most rearward:

Tuning key

Touch fastener

Belt