User Guide

12 PB
CC COMMAND VALUE/RANGE FUNCTION NOTES
MIDI CC 71 0-2 Cabinet Select Selects Speaker Cabinet 1-3 (utilized on the XLR Direct, Phones, and USB outputs)
MIDI CC 74 0-63=Pre; 64-127 = Post Eect Pre/Post Amp Controls position of the Eect before (Pre) the Amp Voicing or after (Post)
MIDI CC 88 0-5 Delay Type Selects Delay type 1-6
MIDI CC 103 0-5 Pitch/Filter Type Selects Pitch/Filter type 1-6
MIDI CC 107 0-63=O; 64-127 = On FX Loop Bypass/Enable Toggles FX Loop On/O (regardless of jack sensing)
Preset Loading
MIDI Program Change (PC) messages can be used to load the CATALYST amp’s MANUAL mode and its twelve Channel A and B presets.
PROGRAM
CHANGE
FUNCTION
0 Sets amp to MANUAL mode
1 Loads Bank 1, Channel A preset
2 Loads Bank 1, Channel B preset
3 Loads Bank 2, Channel A preset
4 Loads Bank 2, Channel B preset
5 Loads Bank 3, Channel A preset
6 Loads Bank 3, Channel B preset
7 Loads Bank 4, Channel A preset
8 Loads Bank 4, Channel B preset
9 Loads Bank 5, Channel A preset
10 Loads Bank 5, Channel B preset
11 Loads Bank 6, Channel A preset
12 Loads Bank 6, Channel B preset