User Manual

Introduction
6
AUDIOGRAM 6 Owner’s Manual
Connect To Your Computer via a Single USB Cable (page 8)
The AUDIOGRAM interface connects to your computer via the supplied USB cable. Stereo audio data is
transferred in both directions—from the interface to the computer, and vice-versa—via the USB connection
(44.1 kHz or 48 kHz sampling frequency).
No Driver Installation Required (page 8)
The AUDIOGRAM system uses the standard drivers included in your computer’s operating system, so
there’s no need to install any extra driver software.
Cubase AI DAW Software Supplied (page 8)
Cubase AI software, included in the AUDIOGRAM package, offers versatile, high-performance hard-disk
recording capability.
Compression (page 16)
Compression increases the overall level without introducing distortion by compressing excessive peaks in
the signals from microphones and guitars.
48V Phantom Power (page 16)
A PHANTOM switch supplies +48V phantom power to the channel 1 microphone input, so you can use
high-quality phantom-powered condenser microphones for superior recording quality.
Features
Accessories
• Cubase AI DVD-ROM
• USB cable
• Owner’s Manual (this book)