User Manual

CS-500 User Guide
12
Procedure from installation to completed
connection
Before starting work, determine the installation method and connection method for this device.
1 Installing the device. > Page 13 to 17
2 Connecting devices. > Page 18 to 19
3 Connecting the power supply (turning on the device). > Page 20
4 Preparing to use the remote control.
4.1 Inserting batteries into the remote control. > Page 21
4.2 Pairing the device and remote control. > Page 22
5 Making necessary initial settings. > Page 23 to 25
6 Displaying the computer screen on a TV.
6.1 If the computer screen does not appear on the TV. > Page 23
Procedure for holding a meeting
Before the first time a computer connected to this device is used to hold a meeting, follow the steps below to check that the
computer screen is displayed on the TV and the audio is output.
1 Turning on the computer.
2 Turning on this device with the remote control (or automatically starting it with auto wakeup).
3 Displaying the standby image on the TV.
4 Connecting the computer to this device with a USB cable.
5 Displaying the computer screen on a TV.
5.1 If the computer screen does not appear on the TV. > Page 23
6 Holding a meeting by using the video conferencing software.
6.1 Selecting this device on the computer if sound is not output. > Page 24
* When this device is used as a webcam, steps
3, 4 and 5.1 are not necessary.
Specifying device settings
• On-screen display menu: Specifying device settings on a TV by using the remote control (For all users) > Page 26
• Yamaha CS Manager: Specifying detailed settings for the device by using the application software (For installers/
administrators) > Page 27
Procedures preparing for use
Installers of this device should read this.
Users of this device should read this.