User Manual
Table Of Contents
- Contents
- Introduction
- Controls and connectors
- Procedures preparing for use
- Setup and connections
- Configuring the device from a TV screen (on-screen display menu)
- Using Yamaha CS Manager to specify detailed settings
- Appendix
CS-500 User Guide
16
Setup and connections
3. Attach the brackets assembled in step 2 to the TV stand, TV and device.
1 Attach the brackets from step 2 to the TV stand.
2 From the underside of the wall mounting bracket, secure the device by using the included screw.
4. Adjust the camera orientation (up or down) by changing the camera’s angle to the stand.
IMPORTANT • Depending on the configuration of the TV stand, also tightly secure the spacers included with
monitor mounting bracket BRK-TV1.
• For details on assembling the TV stand and mounting the TV to it, follow the instructions in the
manual for the TV stand.
1
2
Spacer
TV stand
[Included with monitor mounting bracket]
Screws for mounting TV × 4
(M6 × 12 mm or 30 mm)
(M8 × 15 mm or 35 mm)
* Use screws matching the screw holes in the TV.
* When using spacers, use longer screws.
Device
2
Device
Wall mounting bracket
[Included with wall mounting bracket]
Device fixing screw (1/4 inch) for wall
mounting bracket