User Manual
Table Of Contents
- Contents
- Introduction
- Controls and connectors
- Procedures preparing for use
- Setup and connections
- Configuring the device from a TV screen (on-screen display menu)
- Using Yamaha CS Manager to specify detailed settings
- Appendix
CS-500 User Guide
6
Introduction
Included items
• CS-500 device
• Read This First
• Safety Guide
• USB 2.0 cable (Type-C to Type-A, 5 m)
• HDMI cable (2 m)
• Lens cap
• Remote control
• Coin battery (CR2032) × 2
• AC adaptor with power cord (CW2002100)
• Cable tie
Separately sold items
• Wall mounting bracket (mounting accessory) BRK-WL1
This is required for installing the device onto a wall. It is also used in combination with monitor mounting bracket
BRK-TV1 when installing the device onto a TV.
• Monitor mounting bracket (mounting accessory) BRK-TV1
This is used in combination with wall mounting bracket BRK-WL1 when installing the device onto the VESA mount of a
TV.
• USB cables: CBL-L10AC (10 meters), CBL-L25AC (25 meters)
These are fiber optic USB cables. They are used when the device and computer are far apart. These support USB 3.2
Gen2 (Super Speed Plus) and can communicate at high speeds up to 10 Gbps.
NOTE
The VESA standards are international and define the spacing between screw holes used when attaching video equipment,
such as TVs, to wall mounts and TV stands.