User Manual
Table Of Contents
- Contents
- Introduction
- Controls and connectors
- Procedures preparing for use
- Setup and connections
- Configuring the device from a TV screen (on-screen display menu)
- Using Yamaha CS Manager to specify detailed settings
- Appendix
CS-500 User Guide
9
Controls and connectors
Rear panel
1 [DC-IN] jack
This jack is for connecting the AC adaptor. After connecting the AC adaptor to the [DC-IN] jack on the rear panel, insert
the power plug into an electrical outlet. Connecting the AC adaptor automatically turns on the device. (Page 20)
2 [FUNCTION] button
Can be used to pair the device with the remote control (Page 22) or to return the device to its factory default settings
(Page 56).
3 3.5 mm audio output jack
This jack is for connecting this device to speakers, headphones, etc. (Page 18)
4 [USB] port (Type-C)
This port is for connecting the device to a computer.
This enables displaying the computer screen and configuring the device. Use the included USB 2.0 cable (Type-C to
Type-A) or the separately sold USB cables CBL-L10AC (10 meters) or CBL-L25AC (25 meters) for this connection. For
details on connecting this device, refer to “Connecting devices” (page 18) in this manual.
5 [HDMI] port
This port is for connecting the device to a TV. This allows the TV to display the screen of the computer connected to
the [USB] port and the device’s on-screen display menu (Page 26).
Related links
• Returning to factory default settings (factory reset) (Page 56)
• Connecting devices (Page 18)
1 2 3 4 5