Mini Sound Keyboard Owner's Manual

App-9
2.6 Mono
1011nnnn Bn Status n=Channel number
01111110 7E
00000000 00
Performs the same function as when an All Sounds Off message is
received, and if the 3rd byte (mono number) is in the range of 0 – 16,
sets the corresponding channel to Mono Mode (Mode 4 : m = 1).
2.7 Poly
1011nnnn Bn Status n=Channel number
01111111 7F
00000000 00
Performs the same function as when an All Sounds Off message is
received, and sets the corresponding channel to Poly Mode (Mode 3).
3. SYSTEM EXCLUSIVE MESSAGES
System Exclusive messages control various functions of the CBX-
K1XG, including master volume and master tuning, play mode, effect
type and various other parameters.
3.1 Parameter Change
The CBX-K1XG receives the following parameter change messages.
[ UNIVERSAL REALTIME MESSAGE ]
1) Master Volume
[ UNIVERSAL NON REALTIME MESSAGE ]
1) General MIDI Mode On
2) Identity Request (INQUIRY MESSAGE)
[ XG NATIVE PARAMETER CHANGE ]
1) XG System on
2) XG System Data parameter change
3) Multi Effect1 Data parameter change
4) Multi Part Data parameter change
5) Drums Setup Data parameter change
[ OTHER ]
1) Master Tuning
2) TG300 System Data Parameter change
3) TG300 Multi Effect Data parameter change
4) TG300 Multi Part Data parameter change
5) Disc Orchestra On
3.1.1 Universal Realtime Messages
3.1.1.1 Master Volume
11110000 F0 Exclusive status
01111111 7F Universal Real Time
01111111 7F ID of target device
00000100 04 Sub-ID #1=Device Control Message
00000001 01 Sub-ID #2=Master Volume
0sssssss ss Volume LSB
0
ttttttttt tt Volume MSB
11110111 F7 End of Exclusive
or,
11110000 F0 Exclusive status
01111111 7F Universal Real Time
0xxxnnnn xn Device Number, xxx = irrelevant
00000100 04 Sub-ID #1=Device Control Message
00000001 01 Sub-ID #2=Master Volume
0sssssss ss Volume LSB
0
ttttttttt tt Volume MSB
11110111 F7 End of Exclusive
When received, the Volume MSB will be effective for the Sys-
tem Parameter MASTER VOLUME (page App-12).
3.1.2 Universal Non-Realtime Messages
3.1.2.1 General MIDI Mode On
11110000 F0 Exclusive status
01111110 7E Universal Non-Real Time
01111111 7F ID of target device
00001001 09 Sub-ID #1=General MIDI Message
00000001 01 Sub-ID #2=General MIDI On
11110111 F7 End of Exclusive
or,
11110000 F0 Exclusive status
01111110 7E Universal Non-Real Time
0xxxnnnn xn Device Number, xxx = irrelevant
00001001 09 Sub-ID #1=General MIDI Message
00000001 01 Sub-ID #2=General MIDI On
11110111 F7 End of Exclusive
When General MIDI Mode On is received, the play mode will
be changed to XG mode.
When this happens, the CBX-K1XG will receive the MIDI mes-
sages which compatible with GM System Level 1, and conse-
quently will not receive NRPN and Bank Select messages.
When the C/M mode is active, these messages are ignored.
Since approximately 50ms is required to execute this message,
be sure to leave an appropriate interval before the subsequent
message.
3.1.2.2 Identity Request
11110000 F0 Exclusive status
01111110 7E Universal Non-Real Time
0000nnnn nn Device Number, n= 0...15
00000110 06 Sub-ID #1=General Information
00000001 01 Sub-ID #2=Identity Request
11110111 F7 End of Exclusive
The CBX-K1XG transmits an Identity Reply message (see 3.1.2.2
on page App-3) when this is received.
3.1.3 XG Native Parameter Change
With the Parameter Change messages as listed below, you can
change the characteristic of a Voice, such as by Effect Type or ef-
fect parameter, transpose, tuning, and others.
A connected XG-compatible tone generator can be controlled in
the same way (via the MIDI OUT or TO HOST terminals).
11110000 F0 Exclusive status
01000011 43 YAMAHA ID
0001nnnn 1n Device Number
01001100 4C XG Model ID
0aaaaaaa aa Address High
0aaaaaaa aa Address Mid
0aaaaaaa aa Address Low
0ddddddd dd Data
| |
11110111 F7 End of Exclusive
MIDI Data Format