Owner`s manual

3-2
1
2
3
4
5
6
7
8
9
INSTRUMENT AND CONTROL FUNCTIONS
EAU11003
Indicator and warning lights
1
2
2
ZAUM00**
1. High beam indicator light“&”
2. Turn signal indicator lights“4” and “6”
1
ZAUM00**
1. Coolant temperature warning light“ ”
Indicator and warning lights<IXE>
Turn signal indicator lights<IXE>
High beam indicator light<IXE>
Coolant temperature warning light<IXE>
EAU11440
Coolant temperature warning light “ ”
This warning light comes on when the
engine overheats. When this occurs,
stop the engine immediately and allow
the engine to cool.
The electrical circuit of the warning light
can be checked by turning the key to
“ON”.
If the warning light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical cir-
cuit.
EAU11030
Turn signal indicator lights “
44
44
4” and
“
66
66
6”
The corresponding indicator light flashes
when the turn signal switch is pushed
to the left or right.
ECA10020
cC
Do not operate the engine if it is over-
heated.
EAU11080
High beam indicator light “
&&
&&
&”
This indicator light comes on when the
high beam of the headlight is switched
on.
3D1-F8199-11ch3SGML.pmd 2006/08/17, 18:142