Owner`s manual

3-6
1
2
3
4
5
6
7
8
9
INSTRUMENT AND CONTROL FUNCTIONS
NOTE:
The fuel tank cap cannot be installed
unless the key is in the lock. In addi-
tion, the key cannot be removed if the
cap is not properly installed and locked.
EWA10130
w
Make sure that the fuel tank cap is
properly installed before riding.
EAU13210
Fuel
1
ZAUM00**
1. Fuel tank filler tube
Make sure that there is sufficient fuel in
the tank. Fill the fuel tank to the bottom
of the filler tube as shown.
EWA10880
w
88
88
8 Do not overfill the fuel tank, oth-
erwise it may overflow when the
fuel warms up and expands.
Avoid spilling fuel on the hot
engine.
ECA10070
cC
Immediately wipe off spilled fuel with
a clean, dry, soft cloth, since fuel may
Fuel tank cap<IXE>
Fuel<IXE>
EAU32482
Fuel tank cap
1
2
ZAUM00**
1. Fuel tank cap lock cover
2. Match marks
To remove the fuel tank cap
Slide the lock cover open, insert the key
into the lock, and then turn it 1/4 turn
clockwise. The lock will be released and
the fuel tank cap can be removed.
To install the fuel tank cap
1. Insert the fuel tank cap into the tank
opening with the key inserted in the
lock and with the marks on the cap
and tank aligned.
2. Turn the key counterclockwise to
the original position, remove it, and
then close the lock cover.
3D1-F8199-11ch3SGML.pmd 2006/08/17, 18:146