Owner`s manual

13
OPEN/CLOSE THE CONTROL DOOR
When it is not necessary to operate controls inside the
control door, close the door.
To open or close the door, press the right edge until it clicks.
STANDBY mode
While the power is on, pressing the POWER switch (or the
POWER switch on the remote control transmitter) switches
the system to the STANDBY mode. (In this mode, the
display shows only the time.) In this mode, main voltage is
still present inside the system. If you want to switch off the
system completely, disconnect the AC power plug from the
AC outlet.
TURNING THE POWER ON/OFF TO THIS SYSTEM
If the AC supply lead of CTX-S90 is connected to the AC
outlet, this system can be turned ON and OFF (STANDBY
mode) by pressing the POWER switch on the front panel of
CTX-S90 or on the remote control transmitter.
* If the AC supply lead of MX-S90 is not connected to the AC
OUTLET on the rear panel of CTX-S90, the POWER
switch of MX-S90 must also be pressed to turn it on
separately.
-
+
TAPE
PLAY STOP PLAY
REC/PAUSE
SLEEPPOWER DISPLAY VOLUME
DECK
PHONO/AUX
A/B