Operation Manual

E-36
Recording from the built-in tuner
1 Select the tuner so that “TUNER” appears on the display
by pressing the INPUT selector or button.
2 Tune to the desired station. (Refer to the “TUNING
OPERATION” on pages 23 and 24.)
3 Load a tape into the cassette compartment.
4 When recording with the Dolby NR system, set the Dolby
NR switch to B or C; if not, set it to OFF.
* For selection of the Dolby B or C position, refer to the
“Dolby B and C Type Noise Reduction” on page 29.
5 Set the reverse mode switch to to record on only one
side, or to (or ) for continuous recording on both
sides.
6 Press the REC/PAUSE button.
* The corresponding indicator lights up and the play
direction indicators flash.
7 Press the play button to record on side A, or the play
button to record on side B.
* For continuous recording on both sides, begin on side
A. Recording stops automatically at the end of side B.
To stop recording temporarily
11 Press the REC/PAUSE button.
22 To resume recording, press the play button whose
indicator is flashing.
To stop recording
Press the stop button.
OTHER RECORDINGS
-
+
12345
12345
678
67890
ABCDE
TIME
PROG TAPE EDIT
+
I0
STOP PLAY/PAUSE
RANDOM
REPEAT
CD
TUNER
TAPE
PRESET
DOWN UP
PLAY STOP
REC/PAUSE
SLEEPPOWER DISPLAY VOLUME
DECK
PHONO/AUX
TUNER DIRECT
A/B
A/B/C/D/E
PLAY
EFFECT LEVEL DSP MODE
SP/PHONES
-
+
Receiver
1
5
7, 22 6, 11 7, 22
Tape Deck
4 3
1
7, 22
7, 22
6, 11