User Manual

6
Controls and Connectors
Rear
[INPUT/PARALLEL] connectors
These are speakON connectors (Neutrik NL4) for
connection to a power amplifier or a powered
mixer using a speaker cable. Use only Neutrik
NL4 plugs for connecting speakON connectors.
CAUTION
Use only speaker cables for connecting
speakers to the speaker jacks. Use of
other types of cables may result in fire.
speakON plug
Turn to lock
For the CHR12M, [INPUT/PARALLEL] connectors
are included on both sides.
NOTE
Bottom/side
FRONT
7°
0°
CHR15
Tiltable pole socket
CHR12M Side CHR10 Bottom
Tiltable pole socket (CHR15)
CHR15 has two pole sockets on the bottom. You can
choose the angle of the speaker so that it is positioned
horizontal to the floor or tilting down toward the floor by
7 degrees. These sockets adapt to commercially avail-
able speaker stands and speaker poles of 35 mm
diameter.
Pole socket (CHR12M, CHR10)
CHR12M has a pole socket on the side and CHR10 has
one on the bottom.
7°