manual

CONNECTIONS
10 En
You can play back music files stored on your PC or NAS, audio contents on the Internet radio, by connecting this unit to
a network.
Connect with a commercially available STP (shielded twisted pair) network cable (CAT-5 or higher, straight-through
cable).
• For details on Internet connection, refer to the owner’s manuals of your network devices.
• If you are using a router that supports DHCP, you do not need to configure any network settings for the unit. If you are using a router
that does not support DHCP, configure the network setting from “Network Config” in the setup menu (☞ P.23).
• Wired connections are recommended for devices other than the mobile to ensure high sound quality.
• Some security software installed on your PC or the firewall settings of network devices (such as a router) may block the access of the
unit to the network devices or the Internet. In this case, change the setting of the security software or network devices.
• When setting the subnet manually, each server must be connected to the same subnet as the unit (☞ P.23).
Connecting to a network (PC/NAS/Internet connection)
Notes
LAN
WAN
PC
NAS
Internet
Modem
Broadband router
This unit (CD-N301)
Network cable