CD Recordable/Rewritable Drive Owner's Manual

Connect the USB cable provided to the computer.

Insert the series A plug (with a rectangular cross section) of the USB

cable provided in the USB port of the interface card.

When the CRW-70 drive and computer are connected, the busy LED

flashes green and then lights up orange and “PC” shows on the display.

• Be sure to connect the drive to the USB port of the computer. If you connect the

drive to the computer via a USB hub, the drive may not operate properly.

• If the CRW-70 drive is connected to a USB 1.1 port, which is one of the typical

USB ports installed as standard on computers, the drive operates in accordance

with USB 1.1 standard. (→P. 10)

As soon as the CRW-70 drive is connected to the computer, it automatically

starts installing the device drivers. The device drivers only need to be

installed once when the CRW-70 drive is connected to the computer for the

first time.

For Windows 98 Second Edition

Install the device driver provided.

For details, refer to the separate manual, “Device Driver Installation Guide,”

that came with the CRW-70 drive.

Notes

STEP

2 Install the Device Drivers

Series A plug

USB port

USB cable

(provided)