Technical information

C
08.06 17
CHAPTER
PAGEISSUE
TWO-STROKE ENGINE AM6
ENGLISH
SECTION 3
C - ENGINE
Minarelli Engine
SECTION 2
F.10F.9
1
1
F.12F.11
2
1
2
3
1
F.14F.13
2
1
1
2
11) DISENGAGE the nut from its fixing tab (1 - F.9); using the appropriate wrench (1 - F.10), unscrew and remove
the fixing nut (2 - F.10) of the clutch boss.
12) REMOVE the following pieces in this order: clutch boss (1-F.11), spacer (2-F.11), clutch gear (3-F.11), shim
washer (1-F.12), tapered washer (2-F.12), paying attention to the direction in which they are assembled so as
to reassemble them correctly afterwards.
13) USING the magneto flywheel locking wrench (1-F.13), lock the flywheel and slacken the retaining nut of the
gear on the countershaft with the wrench (1-F.14).
14) REMOVE the gear on the countershaft (1 - F.14) and the key.