Technical information

C
26 08.06
CHAPTER
PAGE ISSUE
TWO-STROKE ENGINE AM6
ENGLISH
SECTION 2
C - ENGINE
Minarelli Engine
F.39F.38
F.37
F.36
2.5 ENGINE REASSEMBLY
1) PLACE the clutch crankcase (right hand side) on a flat surface. Then, fit the spring and the gear selection
poppet ball in their seats and apply grease to prevent them falling out.
2) PREPARE the transmission assembly (primary/secondary) keeping all components together (F.36). Put a
0.6 mm shim washer under the 1
st
speed gear and position the fork in the 3
rd
and 4
th
primary gear (F.36).
LOWER the assembly thus formed into its seats (F.37).
Raise the 5
th
speed gear on the secondary shaft and insert the fork (F.38). Fit the other fork (6
th
speed gear)
into its seat (F.39).