Technical information

4 08.06

Introduction

CHAPTER

PAGE ISSUE

TWO-STROKE ENGINE AM6

ENGLISH

SECTION 1

C - ENGINE

1 INTRODUCTION

• All checks, maintenance, repairs or replacements, etc. on the vehicles manufactured by Malaguti are to be

performed by skilled and expert technical personnel with specific experience in state-of-the-art technology and

full knowledge of the quickest and most rational procedures, technical characteristics, setting values and tight-

ening torques, which may only be properly and exhaustively provided by the manufacturer.

• This set of WORKSHOP MANUALS provides technicians of the sector (Authorised Service Centres, etc.), the

essential information for operating in accordance with the latest good working practices and work safety

regulations.

•

These publications provide all necessary information for routine procedures on all the

MALAGUTI motor vehicles

currently in production at the date of issue. The information provided deals with the motor vehicle ENGINES.

Some basic technical information has been intentionally omitted as it is considered to be common knowledge.

• Additional information is available in the SPARE PARTS CATALOGUES of each model.

• It is important that before referring to the manual, the information given in this general section be carefully read

as it provides all the essential hints and guidelines for best consulting the various topics and main technical

subjects.

Note:

These manuals provide the necessary information and instructions for routine maintenance and servicing.

MALAGUTI reserves the right to make any changes and modifications hereto it deems necessary without

prior notice.

For further information and details, please contact the

MALAGUTI Service Division.

1.1 MANUAL UPDATES

• Updates of this publication will be delivered by us

in a reasonable time

. The superseded sheets should be saved

in the manual as they remain applicable to the servicing of pre-modified engines.

• The table of contents will be duly updated in the event that new pages are inserted, which render the consulta-

tion of the manual difficult.

• IMPORTANT! The Workshop Manuals are to be considered as essential tools to be properly kept up-to-date so

as to maintain their “

validity

” over time.