U Compact Disc Player Lecteur Compact Disc OWNER’S MANUAL MODE D’EMPLOI © 2013 Yamaha Corporation Printed in Malaysia ZK20370
A Living Tradition in Sound A piano comes into this world through the perfect synergy of advanced technical skill and artistry. Such a piano can create sound that truly reflects the player’s feelings. The final stage in piano production is called “voicing”. It is here that the instrument is given its soul.
Excellence in Audio Achievement First HiFi System introduced in 1920 We introduced numerous HiFi components (turntables, FM/AM tuners, integrated amplifiers, preamplifiers, power amplifiers and speakers) in 1955 - 1965. Natural Sound Speaker Series introduced in 1967 NS-20 Monitor Speaker CA-1000 Integrated Amplifier Featuring A-Class operation, the CA-1000 set the standard for integrated amplifiers.
◆ Full-stage balanced signal transmission beginning with the DAC achieves the ultimate in CD reproduction ◆ Independent power supplies with digital and analog completely separated ◆ Exclusive Yamaha loading mechanism and high precision CD drive ◆ Left-right symmetrical design with rigid, stable construction ◆ Pure Direct ◆ Super sound from Super Audio CDs ◆ Heavy feet with newly-developed antivibration spikes ◆ DSD playback via 192 kHz, 24-bit USB DAC ■ Supplied accessories Please check that you have recei
CONTROLS AND FUNCTIONS Controls and functions In this chapter, you will learn the controls and functions of CD-S3000.
Controls and functions ■ Front panel (pages 6 to 9) SA-CD HYBRID TRACK TOTAL REMAIN PROG SHUFFLE REP OFF S ALL A-B STANDBY/ON PURE DIRECT SOURCE LAYER LAYER SA-CD CD DISC SOURCE OPTICAL COAXIAL USB OFF 1 2 3 4 5 7 1 STANDBY/ON/OFF switch Turns on or off this unit. STANDBY/ON (upper position): In this position, you can select STANDBY or ON, using the p CD key on the remote control. OFF (lower position): The power of this unit is turned off.
5 SOURCE key Selects the audio source to be played back. Each time you press this key, the audio source is switched. (coaxial digital input) (optical digital input) y The audio source setting is retained even if you turn off this unit. 6 SOURCE indicators The indicator of the audio source selected with the SOURCE key lights. 7 LAYER key Switches the playback layer of a hybrid Super Audio CD between SA-CD and CD while playback is stopped (page 27).
Controls and functions ■ Front panel (pages 6 to 9) E F G H I J K SA-CD HYBRID TRACK TOTAL REMAIN PROG SHUFFLE REP OFF S ALL STANDBY/ON PURE DIRECT SOURCE LAYER LAYER SA-CD CD DISC SOURCE USB OPTICAL COAXIAL OFF 9 9 Disc tray Loads a disc. 0 A (Open/Close) key Opens or closes the disc tray. y The disc tray also closes automatically when you press: • the (Play) key on the front panel or on the remote control. • the front edge of the disc tray gently.
F Display The brightness can be adjusted with the DIMMER key on the remote control (page 12). G (playback) / (pause) indicator Lights in the playback/pause mode. H Disc type indicator Indicates the type (SA-CD/CD/HYBRID) of the disc in the disc tray. I Time display mode indicator Indicates the time display mode of the display. Change the mode by pressing the DISPLAY key on the remote control (page 13).
Controls and functions ■ Rear panel 1 2 3 USB BALANCED OUT ANALOG OUT BALANCED OUT SYSTEM CONNECTOR GND 1 2 5 OPTICAL COAXIAL DIGITAL IN OUT 3 - COLD AC IN 8 See page 18 for connection information.
6 7 OPTICAL COAXIAL DIGITAL OUT A A Foot The feet of this unit include built-in spikes. Using the spikes can reduce the effect of vibrations on the set. When using the spikes, remove the transport tape, then remove the magnet foot by pulling it. Spike Transport tape Magnet foot Caution English When using the feet’s built-in spikes, the spikes may scratch the shelf or floor on which this unit is installed.
Controls and functions ■ Remote control 3 1 4 p AMP key Turns the Yamaha amplifier ON or switches it to STANDBY mode. 2 3 OPEN/CLOSE key Opens or closes the disc tray. AMP OPEN/CLOSE CD 4 DIMMER PURE DIRECT DISPLAY @ A 5 1 2 3 4 5 6 7 8 9 ENTER CLEAR Some Yamaha amplifiers cannot be controlled with the p AMP key of this remote control. 5 DIMMER key Selects the brightness level for the front panel display.
SHUFFLE key Plays tracks on the disc in random order (shuffle playback). Notes • This operation is ineffective for MP3 or WMA discs. • The shuffle playback mode is cancelled when playback is stopped or the disc is ejected. 8 y • Press this key again to turn off the PURE DIRECT mode. • This setting is retained even if you turn off this unit. A DISPLAY key Switches the time display.
Controls and functions ■ Program playback In the program playback mode, you can play back tracks in a programmed sequence. Notes • This operation is ineffective for MP3 or WMA discs. • The programmed tracks are erased in the following cases: – when the disc is ejected – when this unit is turned off or goes to STANDBY mode – when an audio source other than the disc is selected – when the playback layer of a hybrid Super Audio CD is switched between SA-CD and CD 1 Press PROGRAM while playback is stopped.
4 Press ENTER. The setting value flashes for 3 seconds, then the unit resumes to normal mode. To cancel the setting, press CLEAR. Notes • As the DPLL bandwidth setting value approaches “Lowest,” the accuracy of the operating clock in the DAC improves, but the unit may be susceptible to a change in the clock of the external component. The sound from such a component may more easily skips.
Controls and functions ■ Installing batteries in the remote control 1 Remove the battery compartment cover. 2 Insert the two batteries (AAA, R03, UM-4) according to the polarity markings (+ and -) on the inside of the battery compartment. 1 2 3 Reinstall the battery compartment cover.
Connections In this section, you will make connections between CD-S3000 and your amplifier.
Connections USB BALANCED OUT ANALOG OUT BALANCED OUT SYSTEM CONNECTOR GND 1 2 COAXIAL REMOTE IN +HOT OPTICAL DIGITAL IN OUT 3 - COLD AC IN Stereo pin cable When the SA-CD layer is played, the audio signals are output only from the BALANCED OUT and ANALOG OUT jacks. XLR balanced cable If your amplifier is equipped with XLR balanced input jacks, we recommend balanced connection for optimum audio performance.
USB UT BALANCED OUT OPTICAL COAXIAL DIGITAL IN OPTICAL COAXIAL DIGITAL OUT LINK CONTROL IN AC IN Coaxial digital cable Component equipped with a digital output (PCM) jack Optical digital cable Coaxial digital cable Optical digital cable USB cable (Type B) PC AV receiver equipped with a digital input jack Note Only PCM signals can be input to the DIGITAL IN (OPTICAL/COAXIAL) jacks of this unit. For details on the supported PCM signals, see page 26.
Connections ■ Connecting to the BALANCED OUT jacks Connect your amplifier with the XLR balanced input jacks. The pin assignments for these jacks are shown below. Refer to the owner’s manual supplied with your amplifier and verify that its XLR balanced input jacks are compatible with the pin assignments. ■ Connecting the power cable Plug the power cable into the AC IN inlet when all connections are complete, and then plug in the power cable to the AC outlet.
■ Operating this unit from another room If you connect an infrared receiver and transmitter to the REMOTE IN/OUT jacks of this unit, you can operate the unit and/or external component using the supplied remote control located in another room. Rear panel of CD-S3000 SYSTEM CONNECTOR When you have another Yamaha component supporting remote connection, as this unit does, an infrared transmitter is not necessary.
Playback of music files stored on a PC When a PC is connected to the USB jack of this unit, the unit functions as a USB DAC, enabling music files stored on the PC to be played via an amplifier connected to the unit. ■ Installing the dedicated driver Before connecting a PC to this unit, install the dedicated driver on the PC. 1 Rear panel of CD-S3000 Access the following URL, download the dedicated “Yamaha Steinberg USB Driver,” then extract and execute the file.
■ Playing back music files stored on the PC 1 Connect the PC to this unit, using a USB cable. 2 Turn on the PC. 3 Turn this unit on by pressing the STANDBY/ ON/OFF switch on the front panel. 4 Select “USB,” using the SOURCE key of this unit. 5 Set the audio output destination of the PC to “Yamaha CD Player.
En
Specifications In this section, you will find technical specifications for CD-S3000.
Specifications AUDIO SECTION GENERAL • Frequency Response (1 kHz, 0 dB) SA-CD ..................................................... 2 Hz to 50 kHz (–3 dB) CD ......................................................................... 2 Hz to 20 kHz • Power Supply [China, Korea, Asia, Australia, U.K. and Europe models] .......................................................... AC 220 – 240 V, 50/60 Hz [U.S.A, Canada and Taiwan models] ..........................................................
Playable disc format ■ Supported disc types CD-R, CD-RW digital audio discs Super Audio CD Music CDs made by copying onto a CD-R or CD-RW (including MP3 or WMA format files). This unit is designed to play back compact discs bearing the marks shown below. Never attempt to load any other types of discs into this unit. This unit can also play back 8cm (3-inch) compact discs.
Playable disc format ■ About MP3 and WMA discs You can play back MP3 and WMA files recorded on a CD-R or CD-RW with similar uses as a music CD. MP3 MP3 (MPEG-1 Audio Layer-3) is a standard technology and format for compressing an audio sequence into a small-sized file. However, the original level of sound quality is preserved during playback. Notes • This unit plays back MP3 files in alphanumeric order.
Troubleshooting Refer to the chart below if this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. Problem Cause Remedy See page The unit does not switch ON when STANDBY/ON/OFF is pressed upward. The power cable is not connected nor completely connected. Securely connect the power cable.
Troubleshooting Problem Cause Remedy See page Noise from a nearby tuner. The tuner is too close to this unit. Move the tuner and this unit farther apart. Noise from inside of the disc tray. The disc may be warped. Replace the disc. No sound from the component connected to the DIGITAL IN (OPTICAL or COAXIAL) jack. The output audio source setting on the connected component is not “PCM.” Only PCM audio sources can be played via the DIGITAL IN (OPTICAL/COAXIAL) jacks of this unit.
■ Messages on the information display Message Status NO DISC No disc is set on the disc tray. Check Cable The dedicated “Yamaha Steinberg USB Driver” has not been installed correctly. Or, the audio output of the computer has not been set to “Yamaha CD Player.” Check PC The audio signal from the computer cannot be recognized. Fs: ----kHz No audio signal is recognized.
U Compact Disc Player Lecteur Compact Disc OWNER’S MANUAL MODE D’EMPLOI © 2013 Yamaha Corporation Printed in Malaysia ZK20370
Reference Information Playing back DSD audio using foobar2000 Contents NOTICE............................................................................................................ Required components ................................................................................... Installing foobar2000 ..................................................................................... Installing Yamaha Steinberg USB Driver and configuring its settings ......
Installing foobar2000 1 Download the latest stable version of foobar2000 at the following website. http://www.foobar2000.org/download 2 Double-click the downloaded file “foobar2000_v*.*.*.exe” to start installation. 3 Follow the on-screen instructions to install the software. Installing Yamaha Steinberg USB Driver and configuring its settings 1 Download “Yamaha Steinberg USB Driver” at the following Yamaha website. http://download.yamaha.
Installing the “ASIO support” component 1 Download the “ASIO support” component (foo_out_asio) at the following website. http://www.foobar2000.org/components/view/ foo_out_asio 2 Run foobar2000, then select [File] [Preferences]. 3 Click [Components] [Install]. 4 Select the downloaded component “foo_out_asio.fb2k-component”, then click [Open].
5 6 7 Click [Apply]. In the dialog box, click [OK] to restart foolbar2000. If foolbar2000 is restarted, click [File] [Preferences] [Components], then confirm “ASIO support” is listed in “Installed components”. Installation of the “ASIO support” component is now completed.
Installing the “Super Audio CD Decoder” component 1 Download the latest version of “foo_input_sacd0.*.*.zip” at the following website. http://sourceforge.net/projects/sacddecoder/ files/foo_input_sacd/ 2 3 4 Uncompress the downloaded file “foo_input_sacd-0.*.*.zip”. In the uncompressed folder, double-click “ASIOProxyInstall-0.*.*.exe” to start installation. Follow the on-screen instructions to install the component. 5 Run foobar2000, then select [File] [Preferences].
7 8 9 10 Select the downloaded component “foo_input_sacd-0.*.*.zip”, then click [Open]. Click [Apply]. In the dialog box, click [OK] to restart foolbar2000. If foolbar2000 is restarted, click [File] [Preferences] [Components], then confirm “Super Audio CD Decoder” is listed in “Installed components”. Installation of the “Super Audio CD Decoder” component is now completed.
Configuring DSD playback settings of foobar2000 1 Click [File] [Preferences] [Playback] [Output], then select “ASIO:foo_dsd_asio” from the “Device” pull-down list. 2 Click [Output] [ASIO], then double-click “foo_dsd_asio” in “ASIO drivers”. 3 Configure the following settings. ASIO Driver: Yamaha Steinberg USB ASIO DSD Playback Method: ASIO Native Fs: DSD64 (normal speed playback) or DSD128 (double speed playback) 4 5 Click [X] (close button) to close the window.
U Compact Disc Player Lecteur Compact Disc SAFETY BROCHURE BROCHURE SUR LA SECURITE
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
Caution: Read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances.
• The area between the remote control and this unit must be clear of large obstacles. • Do not spill water or other liquids on the remote control. • Do not drop the remote control.
© 2013 Yamaha Corporation Printed in Malaysia ZG15910
