Manual

• Display information during pro-
gramming
(3)
345
120 :
@ Shows the number of programmed tracks for each side in
turn just after the automatic programming is finished,
and then it is replaced by the number of the first
programmed track for side A.
0) Shows the total time of programmed tracks for each side.
@ Shows the programmed track numbers for each side.
With this function, you can program tracks from one or
more discs in any order to be recorded onto tape.
2,5
4 t
6
[] Stop the unit.
D
PJ If you will select tracks from a disc (or discs)
other than the disc on the Disc 1 tray, make this
unit display the total recorded time of each disc
to be used by pressing the DISC SKIP buttons
in turn.
* This unit will read the contents of a disc by this
operation, if there is a disc to which this operation is
omitted, tracks on the disc cannot be programmed.
Follow step 3 on page 17.
[]
PROG
.q- 1
_1 If necessary, select a desired disc by pressing
the DISC SKIP buttons.
[,1 Select a desired track.
IrA Repeat steps 5 and 6 to program more tracks
for side A of the tape.You can select the same
track again.
* if "ERROR" appears in the display, the track nunther
just selected cannot be programmed because there is
no enough time remaining on side A of the tape.
E-18