Manual

Remote Control Transmitter
@
Battedes (size AA, UM-3, R6) (2)
RCA Pin Cable
• Battery installation
1
• Battery replacement
If you find that the remote control transmitter must be used
closer to the main unit, the batteries are weak. Replace both
batteries with new ones.
• Use only AA, R6, UM-3 batteries for replacement.
• Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
• Remove the batteries if the remote control transmitter will not
be used fbr ml extended period of time.
• If batteries leak, dispose of them immediately. Avoid
touching the leaked material or letting it come in contact with
clothing, etc. Clean the battexy compartment thoroughly
before installing new batteries.
• Remote control transmitter opera-
tion range
L=====J
Remote control sensol'_
Within approximately
6 m (19.7 feet)
8
• There should be no large obstacles between the remote
control transmitter and the main unit.
• If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp, etc.),
it might cause the remote control transmitter not to work
correctly. In this case, reposition the main unit to avoid direct
lighting.
E-3
|